Buffalo Bore subsonic 9MM Luger ammunition was designed to fill the need for full power suppressible ammo. While this ammo is full power, it is “Standard Pressure” and falls within the SAAMI guidelines of 35,000 PSI, so it is designed for use in ALL 9MM handguns, suppressed or otherwise and will not cause accelerated wear in your firearm. This 147gr Gold Dot bullet will mushroom in mammalian tissue at impact velocities as low as 800 fps and will penetrate roughly 20 inches depending on how much bone is struck and how much clothing must be penetrated. This is enough penetration to incapacitate even very large men that are heavily clothed and are struck at bad angles. For those wanting an easy shooting, full power, standard pressure 9mm load that will penetrate deeply and is designed for all 9mm pistols, this is it. This ammunition utilizes a flash suppressed powder that will not substantially affect your eyes in low light, which is when most civilian shootings occur in the US as that is when the criminal element is most active. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

While taking advantage of state of the art testing equipment, this high performance ammunition by Underwood is field tested using popular, real firearms that customers are most likely to own out in the real world with all the elements you would experience. If for some reason Underwood Ammunition fails to meet performance expectations, Underwood stands by their product 100% and will make sure the customer is satisfied with every purchase. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

The Underwood nickel plating process provides several key benefits including; improved feeding in all actions of firearms, enhanced corrosion resistance over traditional brass, improved cosmetics, and ease of cleanup during reloading. Nickel plated casings will not tarnish like brass during storage or when in contact with foreign materials such as leather, moisture, and other metals. Until the development of the Ducta-Bright 7a process, nickel plating casings often limited the number of reloads as compared to raw brass. It was claimed that nickel plated brass casings embrittled the brass therefor making it less desirable for reloaders despite the ease of cleanup that nickel plating offers. In addition, ammunition engineers raising concerns of using nickel plating in very hot +P or magnum loads found that traditional nickel plating often cracked deep-drawn cases, or worse, lead to a total failure. This new process eliminates any concern, to the shooter or reloader, of hazard or ability to re-use the brass.

The Lehigh Xtreme Penetrator bullet features progressive nose geometry, which allows for deep, straight penetration while creating a permanent wound cavity diameter exceeding that of most expanding bullets. To top it off, the bullet is solid copper and is able to overcome barriers to penetration; environmentally friendly, target unfriendly, very unfriendly, downright obnoxiously unfriendly. The magic happens with the nose design where the radial flutes force the hydraulic energy inward and then as the energy is restricted, it accelerates outward creating high pressure spikes damaging surrounding tissue. Kind of similar to sticking your thumb over a garden hose. The permanent wound cavity of the XP is from two to four times greater than what a flat or ball nose bullet generates and often larger than traditional expanding bullets. So what you get is exceptional penetration coupled with a larger permanent wound cavity. The solid copper alloy construction will not deform when contacting hard surfaces like a lead jacketed bullet will do nor will it fragment as some hard cast lead bullets are prone to do. What it will do is overcome surface barriers and penetrate straight and deep while creating a massive wound channel.

Suppressor Safe— The projectile is machined from solid bar stock. This is not a frangible bullet produced from powdered metal.

Features

• Progressive nose geometry for deep, straight penetration
• CNC machined from solid copper to overcome barriers to penetration
• Radial flutes that force the hydraulic energy inward to build pressure
• A permanent wound cavity that is 2 to 4 times greater than flat or ball nose bullets

Consistency and reliability are paramount in self-defense ammunition—and Norma’s Home Defense Safeguard Ammunition line delivers. These offerings cover standard personal defense calibers and are great for Revolvers or semi-automatics. The Jacketed Hollow Point loads from Norma marry reliable expansion, penetration, and affordability with unbelievable quality control and consistency. The result is a complete lineup that is confident and ready to deliver if needed. This ammunition is new production, non-corrosive, in boxer-primed, reloadable brass cases.

Features

• Reliable expansion and penetration for energy transfer on target
• Reliable feed and function for revolvers or semi-automatics
• Excellent quality control and consistency

Nosler Match Grade Ammunition is loaded using Nosler Custom Brass and meticulously weighed powder along with trusted Nosler Bullets. The brass goes through intense quality checks and is inspected for correct length, neck-sized, chamfered, trued, and the flash holes are checked for proper alignment. The resulting ammunition delivers extreme accuracy and consistency unlike many other factory loads.

While taking advantage of state of the art testing equipment, this high performance ammunition by Underwood is field tested using popular, real firearms that customers are most likely to own out in the real world with all the elements you would experience. If for some reason Underwood Ammunition fails to meet performance expectations, Underwood stands by their product 100% and will make sure the customer is satisfied with every purchase. This ammunition is new production, non-corrosive, in boxer primed, reloadable nickel plated brass cases.

Lehigh’s Maximum Expansion Technology is used to produce projectiles that create the largest wound channels of any bullet you can buy. These cavernous hollow points are designed to expand upon contact with a fluid-based medium through hydraulic energy. They do not expand on dry mediums like wood, drywall, bone, or sheet metal. The expansion process of Lehigh’s Maximum Expansion technology is very different than that of a traditional lead jacketed bullet that expands when it comes in contact with a hard surface – we designed these bullets to expand where the expansion is needed and that is in the vital zone of your intended target. Lehigh Maximum Expansion bullets expand with razor sharp petals positioned and maintained at the largest diameter to provide the greatest cutting surface. Contrast this with a traditional jacketed bullet that expands and quickly mushrooms the nose back along the bullets shank once again reducing the diameter down to a less effective size. Through design and testing, we can move the expansion point and maintain the expansion diameter exactly where required providing the optimum terminal performance. All of Underwood Ammo rounds utilize flash suppressed powder so that your vision will not be compromised if it becomes necessary to use your firearm in low light.

The Underwood nickel plating process provides several key benefits including; improved feeding in all actions of firearms, enhanced corrosion resistance over traditional brass, improved cosmetics, and ease of cleanup during reloading. Nickel plated casings will not tarnish like brass during storage or when in contact with foreign materials such as leather, moisture, and other metals. Until the development of the Ducta-Bright 7a process, nickel plating casings often limited the number of reloads as compared to raw brass. It was claimed that nickel plated brass casings embrittled the brass therefor making it less desirable for reloaders despite the ease of cleanup that nickel plating offers. In addition, ammunition engineers raising concerns of using nickel plating in very hot +P or magnum loads found that traditional nickel plating often cracked deep-drawn cases, or worse, lead to a total failure. This new process eliminates any concern, to the shooter or reloader, of hazard or ability to re-use the brass.

Features

• Reduced recoil
• CNC machined from solid copper to overcome barriers to penetration
• Large wound channel

Nosler Match Grade Ammunition is loaded using Nosler Custom Brass and meticulously weighed powder along with trusted Nosler Bullets. The brass goes through intense quality checks and is inspected for correct length, neck-sized, chamfered, trued, and the flash holes are checked for proper alignment. The resulting ammunition delivers extreme accuracy and consistency unlike many other factory loads. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.