Buffalo Bore Anti-Personnel ammunition is loaded with the highest quality components to produce great accuracy and performance. This load was designed for use in ANY / All 44 magnum firearms including those with alloy frames and cylinders. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

Owner of Buffalo Bore Tim Sundleson Anti-Personnel 44 Magnum Ammunition:

This full profile wad cutter hard cast 44 magnum load was designed for the owners of 44 magnum firearms that choose to use those firearms for self defense. This load is specifically designed to permanently and quickly disable. The big flat wad cutter nose crushes living tissue, unlike mushroomed bullets that are slightly rounded on the nose and tend to slip and slide through living tissue. The crushing action of the flat nose keeps penetration straight and when penetration is straight, it is generally very deep, deep enough to obtain full penetration from any angle. The hard cast nose will not deform at these velocities so the nose profile remains constant (flat, with a sharp shoulder) along with bullet path and terminal damage. Noted NYPD ?stake out? officer Jim Cirillo used full profile wad cutters in his 38 SPL revolvers because they incapacitated his targets with certainty.
Unlike our other Anti-Personnel 44 magnum loads, this one utilizes a hard cast bullet, which will not mushroom and the resulting penetration is very deep. Expect at least 24 inches of straight-line penetration in mammalian tissue, thus allowing this load to also serve well on small to medium sized game such as deer, black bear and even elk. This hard cast construction keeps your bore from being substantially lead fouled even after hundreds of rounds.
We’ve utilized a flash suppressed powder to the shooter will not be blinded by his/her own gunfire should you be required to drop the hammer in low light.

Note our real world velocities taken from stock over-the-counter firearms. We prefer to establish advertised velocities from real-world firearms and not from extra long laboratory test barrels that give false high velocities. You know what you are getting in the real world, where it matters, with Buffalo Bore ammunition.

• 1.1308 fps – Ruger Super Black Hawk, 5.5 inch barrel
• 2.1216 fps – S&W MT Gun, 4 inch barrel
• 3.1195 fps – S&W Mod. 329PD, 4 inch barrel

Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is not intended for older guns. It is made for modern firearms only, as some of the ammunition could damage older and weaker firearms. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

Owner of Buffalo Bore Tim Sundleson 44 Rem. Mag. Ammunition:

This is an incredibly accurate, full power 44 Mag., lead free load. The long-for-weight all copper bullet uses up the limited powder capacity of the case and keeps us from driving the bullet any faster than we are currently doing. This 44 mag. load will work great and give adequate penetration for hunting big game species up to about 350 lbs. Since the bullet weight is relatively light, this load only generates moderate recoil.

At Buffalo Bore we always use real over-the-counter firearms to develop our published velocities. We believe the long time industry wide duplicitous practice of using extra long laboratory barrels to achieve exaggerated published velocities is unfair to the customer as he/she will never be able to duplicate such laboratory type velocities in the real world, where it matters.

• 1676 fps — Marlin 1894, 18 inch barrel
• 1475 fps — Ruger Super Blackhawk, 5.5 inch barrel
• 1399 fps — S&W MT Gun, 4 inch barrel

Buffalo Bore Low Recoil ammunition is loaded with the highest quality components to produce great accuracy and performance. This load was designed for use in ANY / All 44 magnum firearms including those with alloy frames and cylinders. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

Owner of Buffalo Bore Tim Sundleson Low Recoil 44 Magnum Ammunition:
This is a general purpose load for those that want to shoot deer sized animals and don’t want the recoil of much heavier bullets/loads.

Below are velocities from my personal guns. At Buffalo Bore we always give real world velocities from real over-the-counter firearms, so that you know exactly what you are getting in the real world, where it matters.

• 1.1225 fps — S&W model 329, 4.0 inch barrel
• 2.1359 fps — Ruger Redhawk, 5.5 inch barrel

Buffalo Bore Heavy ammunition is loaded with the highest quality components to produce great accuracy and performance. From powder to bullet selection this load is made to be one of the best defense loads available. This ammunition is safe to fire in any steel frame revolver or rifle chambered in 44 Remington Magnum that is in safe working condition. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

Owner of Buffalo Bore Tim Sundleson Heavy 44 Magnum Ammunition:

Item 4B (300gr. JFN) is designed for super deep penetration at revolver speeds, but will mushroom and penetrate less deeply at rifle speeds. At handgun speeds you can expect a solid 3 feet of penetration in muscle and bone and at rifle speeds expect roughly 2 feet of penetration in muscle and bone. At handgun velocities, this bullet will act just like item 4A in living tissue. The greater velocities generated by the longer barrel of the rifle will cause the bullet to mushroom and that large mushroom will make a much bigger diameter hole in tissue, but that frontal area on the mushroomed bullet will cut down the depth of penetration.

You’ll note my below velocities form over-the-counter revolvers and rifles.

• Ruger Super Blackhawk with 6 inch barrel– 1330 fps
• Ruger Redhawk 5.5 inch barrel– 1334 fps
• 1894 Marlin with 18.5 inch barrel– 1770 fps

Item 4B is recommended for all STEEL revolvers and rifles on today’s market. It is NOT suitable for scandium or aluminum alloy revolvers.

Buffalo Bore Heavy ammunition is loaded with the highest quality components to produce great accuracy and performance. From powder to bullet selection this load is made to be one of the best defense loads available. This ammunition is safe to fire in any steel frame revolver or rifle chambered in 44 Remington Magnum that is in safe working condition. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

Owner of Buffalo Bore Tim Sundleson Heavy 44 Magnum Ammunition:

Item 4A (305gr. Hard Cast gas Checked LFN) is designed for super deep penetration on large game. The big flat nose keeps the bullet penetrating straight and thus deep. You can expect a good three + feet of penetration. The flat nose also does considerably more damage than a round nosed type of bullet as the flat nose cuts and smashes it way through living matter, while round nosed bullets tend to slip and slide through matter, doing much less damage along the bullet’s path and achieving more shallow penetration due to getting sideways while slipping and sliding through matter.

You’ll note my below velocities from over-the-counter revolvers and rifles.

• Ruger Bisley cut down to 6 inches——1328 fps
• Ruger Red Hawk 5.5 inch—————–1331 fps
• Marlin 1894 18.5 inch———————-1779 fps

Item 4A is recommended for all STEEL revolvers and rifles on today’s market. It is not suitable for scandium or aluminum alloy revolvers.