• Remington Brass 45 ACP Bag of 100

    Remington Brass 45 ACP Bag of 100

    Remington cartridge cases are carefully drawn from specially-alloyed brass to provide consistently exact internal volume and resistance to case stretching and brittleness. Primer pocket tolerances are held to .001″, and closely monitored case neck annealing ensures easier re-sizing and longer reloading life. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them.  Nickel plating is harder than brass and the cases require more effort in sizing.  In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.

    CAD $59.40
    Add to cart

    Remington Brass 45 ACP Bag of 100

    CAD $59.40 Add to cart
  • Winchester Brass 375 Winchester Bag of 50

    Winchester Brass 375 Winchester Bag of 50

    Winchester Reloading Brass is manufactured to extremely tight tolerances to ensure smooth feeding and positive chambering. Consistent case-to-case weight and capacity delivers outstanding accuracy. Winchester’s high quality, durable brass can be reloaded several times. New, unprimed brass. This is not loaded ammunition.

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them.  Nickel plating is harder than brass and the cases require more effort in sizing.  In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.

    CAD $59.40
    Add to cart

    Winchester Brass 375 Winchester Bag of 50

    CAD $59.40 Add to cart
  • Federal Premium Gold Medal Brass 45 ACP Bag of 100

    Federal Premium Gold Medal Brass 45 ACP Bag of 100

    Federal is known for loading some of the best factory ammunition available and this brass is no different. This brass is manufactured to the same high standards and consistency that have made Federal Premium Ammunition one of the favorites of shooters everywhere. This is not loaded ammunition.

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $59.40
    Add to cart

    Federal Premium Gold Medal Brass 45 ACP Bag of 100

    CAD $59.40 Add to cart
  • Federal Premium Gold Medal Brass 40 S&W Bag of 100

    Federal Premium Gold Medal Brass 40 S&W Bag of 100

    Federal is known for loading some of the best factory ammunition available and this brass is no different. This brass is manufactured to the same high standards and consistency that have made Federal Premium Ammunition one of the favorites of shooters everywhere. This is not loaded ammunition.

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $59.40
    Add to cart

    Federal Premium Gold Medal Brass 40 S&W Bag of 100

    CAD $59.40 Add to cart
  • Once Fired Brass 40 S&W Grade 2 Box of 500 (Bulk Packaged)

    Once Fired Brass 40 S&W Grade 2 Box of 500 (Bulk Packaged)

    This brass comes from indoor ranges and may have minor dings, dents or slight imperfections. Most flaws can be easily removed upon resizing or will be shot out upon the first firing. This brass has not been re-sized and must be full-length sized and trimmed before loading the first time. Grade 2 Brass has been tumbled but not yet deprimed. Brass is sold as-is.

    CAD $59.40
    Add to cart

    Once Fired Brass 40 S&W Grade 2 Box of 500 (Bulk Packaged)

    CAD $59.40 Add to cart
  • Alliant Reloder 22 Smokeless Gun Powder

    Alliant Reloder 22 Smokeless Gun Powder

    Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.

    A top-performing big game rifle powder, the Reloder 22 is ideal for use with magnum rifle loads and for loading heavy bullets in standard rifle calibers. Reloder 22 has excellent metering qualities that make it both accurate and consistent in loading. All of this makes Reloder 22 the powder of choice for 270, 7mm magnum and .300 Win Mag.

    Warnings from the Manufacturer:

    • Do not exceed the loads displayed in the reloaders guide.
    • Never mix any two powders regardless of type, brand, or source.
    • Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
    Price range: CAD $59.83 through CAD $301.77
    Select options This product has multiple variants. The options may be chosen on the product page

    Alliant Reloder 22 Smokeless Gun Powder

    Price range: CAD $59.83 through CAD $301.77 Select options This product has multiple variants. The options may be chosen on the product page
  • Alliant Reloder 23 Smokeless Gun Powder

    Alliant Reloder 23 Smokeless Gun Powder

    Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.

     

    To achieve outstanding accuracy in the widest range of conditions, shooters need propellant that performs consistently across temperature extremes. Like its sister product, AR-Comp, new Reloder 23 from Alliant Powder does exactly that. Its sophisticated TZ technology manipulates the response of the material and resists the natural tendency to generate more pressure at higher temperatures and less pressure at lower temperatures. Reloder 23 is perfect for long-range target shooters seeking performance similar to Reloder 22 with world-class temperature stability.

     

    Warnings from the Manufacturer:

    • Do not exceed the loads displayed in the reloaders guide.
    • Never mix any two powders regardless of type, brand, or source.
    • Never substitute any smokeless powder for Black Powder or any Black Powder substitute.

     

    Features

    • TZ technology provides exceptionally consistent velocities across temperature extremes
    • Contains proprietary de-coppering additive
    • Ideal for long-range target shooting
    • Excellent lot-to-lot consistency
    • Formulation contains no DNT or DPB

     

     

    Price range: CAD $59.83 through CAD $503.19
    Select options This product has multiple variants. The options may be chosen on the product page

    Alliant Reloder 23 Smokeless Gun Powder

    Price range: CAD $59.83 through CAD $503.19 Select options This product has multiple variants. The options may be chosen on the product page
  • Hodgdon CFE® 223

    Hodgdon CFE® 223

    This spherical propellant yields top velocities in many cartridges such as the 204 Ruger, 223 Remington/5.56mm NATO, 22-250 Remington and the 308 Winchester/7.62mm NATO, plus many, many more.

    CFE 223 contains our Copper Fouling Eraser ingredient, originally used in military propellant, which greatly deters copper fouling and contributes to longer periods of top accuracy with less barrel cleaning time.

    Being a spherical powder, metering is superbly accurate.

    Available in 1 lb. and 8 lb. containers.

    Price range: CAD $59.83 through CAD $428.39
    Select options This product has multiple variants. The options may be chosen on the product page

    Hodgdon CFE® 223

    Price range: CAD $59.83 through CAD $428.39 Select options This product has multiple variants. The options may be chosen on the product page
  • Hodgdon H335®

    Hodgdon H335®

    Price range: CAD $59.83 through CAD $443.35
    Select options This product has multiple variants. The options may be chosen on the product page

    Hodgdon H335®

    Price range: CAD $59.83 through CAD $443.35 Select options This product has multiple variants. The options may be chosen on the product page
  • Hodgdon HS-6®

    Hodgdon HS-6®

    HS-6 is a fine spherical propellant that has wide application in pistol and shotshell.

    In pistol, 9mm, 38 Super, 40 S&W and 10mm Auto are some of the cartridges where HS-6 provides top performance.

    In shotshell, HS-6 yields excellent heavy field loadings in 28-, 20-, 12- and 10-gauge.

    HS-6 is truly an outstanding spherical propellant and identical to Winchester’s discontinued 540.

    Available in 1 lb. and 8 lb. containers.

    Price range: CAD $59.83 through CAD $443.35
    Select options This product has multiple variants. The options may be chosen on the product page

    Hodgdon HS-6®

    Price range: CAD $59.83 through CAD $443.35 Select options This product has multiple variants. The options may be chosen on the product page
  • Hodgdon Superformance®

    Hodgdon Superformance®

    Hodgdon® Powder Company and Hornady® have teamed together to answer the reloading question; “Can I buy the powder used in Hornady Superformance factory ammunition?”

    Superformance delivers striking velocities in cartridges like the 22-250 Remington, 243 Winchester and 300 Winchester Short Magnum. Targeted velocities are well in excess of 100 fps over the best published handloads and even larger gains over factory ammunition!

    Because this propellant is tailored for specific applications, the number of cartridges and bullets is limited, but where it works, it really works!

    Available in 1 lb. and 8 lb. containers.

    Price range: CAD $59.83 through CAD $443.35
    Select options This product has multiple variants. The options may be chosen on the product page

    Hodgdon Superformance®

    Price range: CAD $59.83 through CAD $443.35 Select options This product has multiple variants. The options may be chosen on the product page
  • Hodgdon Hybrid 100V

    Hodgdon Hybrid 100V

    Hybrid 100V is the result of combining the technologies of spherical powders and extruded propellants. The chemistry of a spherical powder is combined with the geometry of an extruded propellant, creating a smooth-metering, super-short granule, extruded, shaped propellant with high energy.

    HYBRID 100V has a burn speed between H4350 and H4831, yielding superb performance in such popular calibers as 270 Winchester, 243 Winchester Super Short Magnum, 7mm Remington Magnum, 300 Winchester Magnum and dozens more.

    Available in 1 lb. and 8 lb. containers.

    Price range: CAD $59.83 through CAD $441.99
    Select options This product has multiple variants. The options may be chosen on the product page

    Hodgdon Hybrid 100V

    Price range: CAD $59.83 through CAD $441.99 Select options This product has multiple variants. The options may be chosen on the product page
  • Starline Brass 338 Federal

    Starline Brass 338 Federal

    Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.

    Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them.  Nickel plating is harder than brass and the cases require more effort in sizing.  In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.

    CAD $59.84
    Add to cart

    Starline Brass 338 Federal

    CAD $59.84 Add to cart
  • Alliant Reloder 7 Smokeless Gun Powder

    Alliant Reloder 7 Smokeless Gun Powder

    Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.

    Ideal for small caliber varmint loads, Reloder 7 is consistent in metering so it meets the needs of the most demanding benchrest shooters. It can also be used in rifles like the 45-70 Gov’t and the 450 Marlin.

    Warnings from the Manufacturer:

    • Do not exceed the loads displayed in the reloaders guide.
    • Never mix any two powders regardless of type, brand, or source.
    • Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
    Price range: CAD $60.51 through CAD $300.55
    Select options This product has multiple variants. The options may be chosen on the product page

    Alliant Reloder 7 Smokeless Gun Powder

    Price range: CAD $60.51 through CAD $300.55 Select options This product has multiple variants. The options may be chosen on the product page
  • Alliant Reloder 19 Smokeless Gun Powder

    Alliant Reloder 19 Smokeless Gun Powder

    Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.

    Producing remarkable results in 30-06 Springfield and 338 Winchester Magnum loads, Reloder 19 is accurate, consistent and meters excellently.

    Warnings from the Manufacturer:

    • Do not exceed the loads displayed in the reloaders guide.
    • Never mix any two powders regardless of type, brand, or source.
    • Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
    Price range: CAD $60.51 through CAD $300.55
    Select options This product has multiple variants. The options may be chosen on the product page

    Alliant Reloder 19 Smokeless Gun Powder

    Price range: CAD $60.51 through CAD $300.55 Select options This product has multiple variants. The options may be chosen on the product page

Main Menu