-
Starline Brass 45 ACP
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $43.52 -
Starline Brass 9mm Luger +P
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $36.72 -
Starline Brass 9mm Luger
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $32.64 -
Lyman Micro-Touch Digital Powder Scale 1500 Grain Capacity
Product Overview
Lyman is one of the most recognized names in reloading, producing innovative tools for serious shooters and reloaders. Offering products that get the job done while still offering value and advancing technology. Lyman uses its years of experience and user feedback to offer the best performing reloading tools available.
The Lyman Micro-Touch 1500 offers reloaders many high end features at an affordable price. Featuring touch screen controls and a large easy to read display, this scale is accurate to 1/10th of a grain over its full 1500 grain operating range. Power can be supplied by the included AC adapter or three standard AAA batteries. With its compact size and ability to run on both AC and battery power this scale can be used at home or at the range. Loaded with all of these features the Accu-Touch 1500 continues with Lyman’s commitment to value and getting the job done.
Accessories:
- AC adapter
- Fold back dust cover
- Powder Pan
- Calibration Weight
Features
- Touch Screen Controls
- Battery Back Up
CAD $101.24 -
Lyman Gen 6 Compact Touch Screen Digital Powder Scale and Dispenser
Product Overview
Lyman is one of the most recognized names in reloading, producing innovative tools for serious shooters and reloaders. Offering products that get the job done while still offering value and advancing technology. Lyman uses its years of experience and user feedback to offer the best performing reloading tools available. Not for use with Blackpowder.
Including all the great features of the Gen5, the compact Gen6 design takes a minimum of bench space and offers unrestricted pan and touch screen access for both right and left hand users. Accurate to one tenth grain, the Gen6 dispenses all types of smokeless powder at two grains per second. In addition, it features an auto repeat function that drops a precise charge each time the pan is reset. Based on re-engineered digital technology that overcomes problems commonly experienced by older designs, the system is packed with additional state of the art improvements like fast, 3 minute warmup, anti-static and anti-drift technology. Also included is an Electronic Interference Shield that resists interference from cell phones and other electronic devices. Changing powder is made fast and clean with the quick drain feature that prevents powder from spilling when removing it from the hopper.
Features
- Touch Screen Controls
- Anti-Static/Anti-Drift Technology
- Fast 3 Minute Warm-Up
- Uses 50% less bench space
CAD $363.14 -
Hornady M2 Digital Bench Powder Scale 1500 Grain Capacity
The Hornady M2 Digital Bench Powder Scale is made from the same high quality, precision load cell found on the Hornady Auto Charge. The high performance Bench Scale is the perfect addition to your reloading bench. With a capacity of 1500 grains, you can weigh powder, bullets, cases, cartridges and more. The large LCD display is easy to read and weighs precisely to a tenth (0.1) of a grain. Included are two calibration weights, AC adaptor, 220V adaptor, and metal powder pan
CAD $249.74 -
Lyman Accu-Touch 2000 Digital Powder Scale 2000 Grain Capacity
Product Overview
Lyman is one of the most recognized names in reloading, producing innovative tools for serious shooters and reloaders. Offering products that get the job done while still offering value and advancing technology. Lyman uses its years of experience and user feedback to offer the best performing reloading tools available.
The Lyman Accu-Touch 2000 offers reloaders many high end features at an affordable price. Featuring touch screen controls and anti-drift technology, this scale is accurate to 1/10th of a grain over its full 2000 grain operating range. Loaded with options like ambidextrous powder trickler, powder brush, pop out storage tray, and a dust cover. Power can be supplied by the included AC adapter or a standard 9V battery. Loaded with all of these features the Accu-Touch 2000 continues with Lyman’s commitment to value and getting the job done.
Accessories:
- Removable powder trickler
- Powder brush
- AC adapter
- Fold back dust cover
Features
- Touch Screen Controls
- Anti-Drift Technology
- Pop Out Storage Tray
CAD $195.74 -
Redding 3 Powder Measure Universal Metering Chamber
Product Overview
A reloader never knows when a part might break. Be prepared for anything with high quality factory replacement parts that will have your Redding 3 Powder Measure metering powder like the day it was new.
Function: Replacement metering chamber for loads between 5 and 100 grains
Notes: Will not fit Redding 3BR Powder MeasureCAD $46.43 -
Hornady Lock-N-Load Iron Press Powder Measure Attachment
Product Overview
The Hornady Iron Press powder measure bracket designed for the addition of a Hornady Lock-N-Load Powder measure to the top of an Iron Press.
CAD $29.69 -
Redding Match Grade 3BR Powder Measure with Handgun Metering Chamber
Product Overview
The Redding Match-Grade 3BR Powder Measure is designed to be “out of the box” match ready. Noted for its ability to throw a broad range of charges, large capacity and proven performance record, this measure features an adjustable powder baffle for added charge uniformity, a positive lock and a zero-backlash micrometer. Bench-front mounting bracket included. Stand sold separately.
Features: Throw handle included
Accessories:- Pistol Micrometer has adjustable pistol zero backlash micrometer metering chamber that will not work loose and will measure from 1 to 10 grains
- Includes a bench-front mounting bracket with no threads
Notes:
- Drop tube accepts from 22-50 caliber cases
- Powder hopper has a baffle to keep all charges uniform
- Positive lock on rotor to keep setting in place
CAD $248.45 -
MEC 1090 Powder Drop Powder Measure
Product Overview
As an industry-leading manufacturer of shotshell reloading equipment and clay target machines, MEC brings its knowledge and expertise to the metallic reloading marketplace. The powder measure is used to measure out the powder for reloading. Measure powder by lifting the handle and dropping it back down. The powder measure can measure from 1gr. To 60g. The included stand allows this powder measure to be used on the bench or it can be removed and the powder measure will attach to any progressive reloading press using 7/8″-14 threads. With over 60 years of shooting sports experience, the addition of the MEC metallic reloading products continues the reloading heritage from the BRAND YOU TRUST!
Features
- Convenient powder measure stand included
- Ambidextrous operation
- 12″ powder hopper to reduce down time refilling
CAD $184.94 -
Frankford Arsenal X-10 Progressive Press Case Activated Powder Measure
Product Overview
The Frankford Arsenal Case Activated Powder Measure is compatible with the X-10 Progressive Reloading Press and features sturdy aluminum construction, a unique hopper to prevent powder bridging, micrometer adjustable powder dispensing, and ultra smooth ball bearing operation. Included with the powder measure is the required linkage for plug-and-play operation with the X-10 Progressive Press.
Features
- Includes required linkage for operation
- Static free aluminum body
- Unique hopper shape prevents powder bridging
- Micrometer adjustable powder dispensing
- Powder drum rides in ball bearings for smooth operation
CAD $172.79 -
Frankford Arsenal Bench Top Powder Measure with Stand
Product Overview
The Frankford Arsenal bench mounted Powder Measure features a static free aluminum body, a unique hopper shape to eliminate powder bridging and binding, micro-adjustable dispensing, and ultra smooth ball bearing operation which all combine to maximize powder dispensing accuracy. The powder measure comes ready to install with a bench mounting plate.
Features
- STATIC FREE ALUMINUM BODY
- COMPATIBLE WITH .22 – .50 CAL
- NO BINDING OR BRIDGING OF POWDER
- MICRO ADJUSTABLE DISPENSING
- HANDGUN POWDER DRUM AVAILABLE
- BENCH MOUNT PLATE
- POWDER DRUM RIDES IN BALL BEARINGS FOR SMOOTH OPERATION
CAD $148.49 -
Frankford Arsenal Platinum Series Intellidropper Digital Powder Scale and Dispenser
Product Overview
The Frankford Arsenal Platinum Series Electronic Powder Dropper features an individual powder calibration button for the fastest, most accurate powder measurements. The large back-lit LCD display allows for easy-to-see controls perfect for any user. The Powder Dropper stores load data in your smart phone or tablet downloadable App. Auto and manual trickle capability with up to 250 grains of powder per throw. Holds up to 7,000gr (1lb) of powder and offers +/- 0.1 grain accuracy. Not for use with Blackpowder.
The downloadable app features preloaded bullet and powder databases, with the ability to add additional bullets/powders. The app stores your load data, has a preloaded cartridge list, powder list, caliber with bullet type, weight, ballistic coefficient, sectional density and length options. The app also allows you to input charge weight, case, time primer, length of barrel and more. The app also allows for the uploading of grouping images.
Features
- Large back-lit LCD display
- Auto and manual trickle capability
- Holds up to 7,000gr (1lb) of powder
- Bluetooth capability
- Downloadable App functionality
CAD $310.49 -
Redding 3 Powder Measure with Universal Metering Chamber
Product Overview
The Redding Model 3 Powder Measure is a great powder measure for any reloader. The micrometer metering chamber is easy to read and located very conveniently in the front of the measure for easy adjustments. The micrometer feature allows reloaders to record their favorite settings for quick reference and set-up when switching between loads. The cast iron from, hand honed fit between the frame and surface drum allows easy metering and cutting of even the most stubborn powders. The included bench-front mounting bracket and see-thru drop tube give the reloader a way to mount the measure to their bench and allow them to see that all of the powder has been dispensed.
Features:
- Hand honed fit between frame and surface drum, large capacity powder reservoir
- Body has standard 7/8″-14 thread to fit mounting bracket and optional bench stand with locking ring for fast dumping
Includes: 22-50 caliber see-thru drop tube
CAD $214.64
- Home
- Handgun Ammunition
- 10mm Auto
- 25 ACP
- 30 Super Carry
- 32 ACP
- 32 H&R Magnum
- 32 S&W
- 32 S&W Long
- 327 Federal Magnum
- 357 Magnum
- 357 Sig
- 38 S&W
- 38 Special
- 38 Super
- 380 ACP
- 40 S&W
- 40 Super
- 400 Cor-Bon
- 41 Remington Magnum
- 44 Remington Magnum
- 44 Special
- 45 ACP
- 45 Auto Rim
- 45 Colt (Long Colt)
- 45 GAP
- 45 Super
- 45 Winchester Magnum
- 454 Casull
- 460 Rowland
- 460 S&W Magnum
- 5.7x28mm FN
- 50 Action Express
- 500 JRH
- 500 S&W Magnum
- 7.62x25mm Tokarev
- 9mm Luger
- 9mm Makarov
- 9x25mm Dillon
- Primers
- Reloading Brass
- Smokeless Powder
- Rifle Ammunition
- 17 Remington
- 204 Ruger
- 22 Hornet
- 22 Nosler
- 22-250 Remington
- 220 Swift
- 221 Fireball
- 222 Remington
- 223 Remington
- 223 Winchester Super Short Magnum
- 224 Valkyrie
- 243 Winchester
- 25-06 Remington
- 257 Roberts
- 257 Weatherby Magnum
- 260 Remington
- 264 Winchester Magnum
- 270 Weatherby Magnum
- 270 Winchester
- 270 Winchester Short Magnum
- 28 Nosler
- 280 Remington
- 280 Remington Ackley Improved 40-Degree Shoulder
- 30 Carbine
- 30 Nosler
- 30-06 Springfield
- 30-30 Winchester
- 30-378 Weatherby Magnum
- 30-40 Krag
- 300 AAC Blackout (7.62x35mm)
- 300 H&H Magnum
- 300 PRC
- 300 Remington Short Action Ultra Magnum
- 300 Remington Ultra Magnum
- 300 Savage
- 300 Weatherby Magnum
- 300 Winchester Magnum
- 300 Winchester Short Magnum
- 303 British
- 308 Winchester
- 32 Winchester Special
- 32-20 WCF
- 325 Winchester Short Magnum (WSM)
- 33 Nosler
- 338 Federal
- 338 Lapua Magnum
- 338 Remington Ultra Magnum
- 338 Winchester Magnum
- 338-06 A-Square
- 340 Weatherby Magnum
- 35 Remington
- 35 Whelen
- 350 Legend
- 358 Winchester
- 375 H&H Magnum
- 375 Ruger
- 375 SOCOM
- 38-55 WCF
- 4.6x30mm HK
- 404 Jeffery
- 416 Remington Magnum
- 416 Rigby
- 44-40 WCF
- 444 Marlin
- 45 Raptor
- 45-70 Government
- 450 Bushmaster
- 458 HAMR
- 458 Lott
- 458 SOCOM
- 458 Winchester Magnum
- 460 Weatherby Magnum
- 470 Nitro Express
- 5.56x45mm NATO
- 50 Beowulf
- 500 Auto Max
- 500 Nitro Express 3″
- 6.5 Creedmoor
- 6.5 Grendel
- 6.5 PRC
- 6.5-300 Weatherby Magnum
- 6.5mm-284 Norma
- 6.5x47mm Lapua
- 6.5x55mm Swedish Mauser
- 6.8 Western
- 6.8mm Remington SPC
- 6mm Advanced Rifle Cartridge (6mm ARC)
- 6mm Creedmoor
- 6mm Remington
- 7.62x39mm
- 7.62x51mm NATO
- 7.62x54mm Rimmed Russian
- 7mm Remington Magnum
- 7mm Remington Short Action Ultra Magnum
- 7mm Remington Ultra Magnum
- 7mm STW
- 7mm Weatherby Magnum
- 7mm-08 Remington
- 7x57mm Mauser (7mm Mauser)
- 7x64mm Brenneke
- 8mm Remington Magnum
- 8x57mm JS Mauser (8mm Mauser) (323 Dia)
- 9.3x62mm Mauser
- 9.3x74mm Rimmed
- Rimfire Ammunition
- Shotgun Ammunition