No products in the cart.
-
Alliant Sport Pistol Smokeless Gun Powder
Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.
Precision and action shooters need consistent, clean-burning propellant that lets them perform to their peak when a competition is on the line. Alliant Powder Sport Pistol delivers on these demands with extremely reliable cycling, excellent charging and case fill, and ballistics that lend themselves to a range of popular loads. Sport Pistol’s low-muzzle-flash formulation is also optimized for polymer-coated bullets. Other double base powders can dissolve the polymer coatings at the bullet base, and this exposes the lead to vaporization due to the intense heat during the ballistic cycle. The medium-fast burning Sport Pistol is also very temperature stable, so there is little velocity deviation to worry about at seasonal competitions.
Price range: CAD $46.23 through CAD $344.07
Alliant Sport Pistol Smokeless Gun Powder
Price range: CAD $46.23 through CAD $344.07 Select options This product has multiple variants. The options may be chosen on the product page -
Alliant Steel Smokeless Gun Powder
Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.
Steel — a non-toxic hunting smokeless powder that creates a high velocity load for 10 and 12 gauge shotshells. It’s consistent at all temperatures and its performance is proven time and time again.
Warnings from the Manufacturer:
- Do not exceed the loads displayed in the reloaders guide.
- Never mix any two powders regardless of type, brand, or source.
- Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
Price range: CAD $47.59 through CAD $178.15
Alliant Steel Smokeless Gun Powder
Price range: CAD $47.59 through CAD $178.15 Select options This product has multiple variants. The options may be chosen on the product page -
Alliant Unique Smokeless Gun Powder
Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.
Created as an “all-around” shotshell powder, Alliant’s Unique powder is clean burning, versatile and can be used with most hulls, primers and shotshell wads. Unique is also a preferred powder for loading most popular handgun cartridges as well.
Warnings from the Manufacturer:
- Do not exceed the loads displayed in the reloaders guide.
- Never mix any two powders regardless of type, brand, or source.
- Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
Price range: CAD $46.91 through CAD $331.83
Alliant Unique Smokeless Gun Powder
Price range: CAD $46.91 through CAD $331.83 Select options This product has multiple variants. The options may be chosen on the product page -
Area 419 Billet Aluminum Powder Cup for RCBS ChargeMaster 1500
Product Overview
The Area 419 Billet Chargemaster Powder Cup system system includes a replacement load cell tray turned from 6061-T6 aluminum, as well as the long handled cup as well. This pan was designed to sit much lower on the scale so the cup could be as tall as possible without interfering with the spout. The tray/cup have a tapered interface so that the cup always sits in the exact same location. The bottom of the cup is also dished so that if you get one or two kernels of powder on the tray, it wont affect how the cup sits.
The Area 419 Cup is roughly 2″ in diameter and 1″ tall. The handle sticks out about 3″. Weight is roughly 700 grains for the cup, this does not reduce the capacity of the scale though, as you can still put 1500 grains in it; if it would fit, you can physically fit around 400 grains of Retumbo in it for reference.
CAD $87.75 -
Blackhorn 209
Product Overview
Price range: CAD $76.15 through CAD $456.95
Blackhorn 209
Price range: CAD $76.15 through CAD $456.95 Select options This product has multiple variants. The options may be chosen on the product page -
Blackhorn 209 Charge Tubes
Product Overview
CAD $14.84 -
Blackhorn 209 High Volume Charge Tubes
Blackhorn 209 High Volume Charge Tubes make loading modern in-line muzzleloaders fast and accurate. Designed to accommodate volumetric charges of up to 150 grains, these charge tubes reload faster than pellets for quicker follow up shots.
Weather Resistant Up to 150 Grains by Volume Faster than Pellets for Reloading
10 Pack
CAD $21.59 -
Dogtown Brass 204 Ruger
Dogtown, in proud partnership with Nosler, delivers premium reloading brass at volume prices. Manufactured with the traditional Nosler philosophy of uncompromising attention to detail, Dogtown brass is created to exact dimensional standards and tolerances, using quality materials for maximum accuracy and consistency potential while extending case life. Dogtown brass also undergoes rigorous quality control to ensure you receive the best product possible. Pair these cases with quality Dogtown bullets and you’ve got a combo that is sure to provide the accuracy and extreme terminal ballistics that varmint hunters demand. Don’t miss out on this exclusive opportunity to purchase premium brass at bulk prices. This brass is new and unprimed. This is not loaded ammunition.
Brass Preparation:With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $56.70 -
Dogtown Brass 22 Nosler
Dogtown, in proud partnership with Nosler, delivers premium reloading brass at volume prices. Manufactured with the traditional Nosler philosophy of uncompromising attention to detail, Dogtown brass is created to exact dimensional standards and tolerances, using quality materials for maximum accuracy and consistency potential while extending case life. Dogtown brass also undergoes rigorous quality control to ensure you receive the best product possible. Pair these cases with quality Dogtown bullets and you’ve got a combo that is sure to provide the accuracy and extreme terminal ballistics that varmint hunters demand. Don’t miss out on this exclusive opportunity to purchase premium brass at bulk prices. This brass is new and unprimed. This is not loaded ammunition.
Brass Preparation:With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $56.70 -
Dogtown Brass 223 Remington
Dogtown, in proud partnership with Nosler, delivers premium reloading brass at volume prices. Manufactured with the traditional Nosler philosophy of uncompromising attention to detail, Dogtown brass is created to exact dimensional standards and tolerances, using quality materials for maximum accuracy and consistency potential while extending case life. Dogtown brass also undergoes rigorous quality control to ensure you receive the best product possible. Pair these cases with quality Dogtown bullets and you’ve got a combo that is sure to provide the accuracy and extreme terminal ballistics that varmint hunters demand. Don’t miss out on this exclusive opportunity to purchase premium brass at bulk prices. This brass is new and unprimed. This is not loaded ammunition.
Brass Preparation:With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $39.15 -
Dogtown Brass 243 Winchester
Dogtown, in proud partnership with Nosler, delivers premium reloading brass at volume prices. Manufactured with the traditional Nosler philosophy of uncompromising attention to detail, Dogtown brass is created to exact dimensional standards and tolerances, using quality materials for maximum accuracy and consistency potential while extending case life. Dogtown brass also undergoes rigorous quality control to ensure you receive the best product possible. Pair these cases with quality Dogtown bullets and you’ve got a combo that is sure to provide the accuracy and extreme terminal ballistics that varmint hunters demand. Don’t miss out on this exclusive opportunity to purchase premium brass at bulk prices. This brass is new and unprimed. This is not loaded ammunition.
Brass Preparation:With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $29.70 -
Factory Second Brass 9mm Luger Bag of 100 (Bulk Packaged)
Blemished brass is bulk-packaged, factory seconds that didn’t meet specification. For majority of the brass being offered, this blemish is a slight discoloration or blemish in the finish. Hurry, quantities are limited and at these prices they won’t last long! This is not loaded ammunition.
CAD $22.95 -
Federal Premium Brass 270 Winchester Short Magnum (WSM) Bag of 50
Federal is known for loading some of the best factory ammunition available and this brass is no different. This brass is manufactured to the same high standards and consistency that have made Federal Premium Ammunition one of the favorites of shooters everywhere. This is not loaded ammunition.
Brass Preparation:With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $74.25 -
Federal Premium Gold Medal Brass 22-250 Remington Bag of 100
Federal is known for loading some of the best factory ammunition available and this brass is no different. This brass is manufactured to the same high standards and consistency that have made Federal Premium Ammunition one of the favorites of shooters everywhere. This is not loaded ammunition.
Brass Preparation:With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $93.15
