• Nosler Custom Brass 338 Lapua Magnum Box of 25

    Nosler Custom Brass 338 Lapua Magnum Box of 25

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $161.84
  • Nosler Custom Brass 375 H&H Magnum Box of 25

    Nosler Custom Brass 375 H&H Magnum Box of 25

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $161.84
  • Nosler Custom Brass 7mm STW Box of 25

    Nosler Custom Brass 7mm STW Box of 25

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $161.84
  • Nosler Custom Brass 338 Remington Ultra Magnum Box of 25

    Nosler Custom Brass 338 Remington Ultra Magnum Box of 25

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $161.84
  • Nosler Custom Brass 7mm Remington Ultra Magnum Box of 25

    Nosler Custom Brass 7mm Remington Ultra Magnum Box of 25

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $161.84
  • Nosler Custom Brass 9.3x62mm Mauser Box of 25

    Nosler Custom Brass 9.3x62mm Mauser Box of 25

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $161.84
  • Hornady Match Brass 50 BMG Box of 20

    Hornady Match Brass 50 BMG Box of 20

    Every single Hornady case, regardless of the lot in which it was produced, is virtually identical to other Hornady cases in the same caliber. For you, this means consistent pressures, velocity and accuracy — every time. Concentricity helps to ensure proper bullet seating in both the case and the chamber of your firearm. Higher concentricity also aids in a uniform release of the bullet on firing, for optimal velocity and accuracy.

     

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $163.00
  • Lapua Brass 7x64mm Brenneke Box of 100

    Lapua Brass 7x64mm Brenneke Box of 100

    Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua’s exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. This is not loaded ammunition.

     

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $169.00
  • Nosler Custom Brass 264 Winchester Magnum Box of 50

    Nosler Custom Brass 264 Winchester Magnum Box of 50

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $170.00
  • Nosler Brass 260 Remington Bag of 100

    Nosler Brass 260 Remington Bag of 100

    Nosler Brass is manufactured with the traditional Nosler philosophy of uncompromising attention to detail. Nosler cartridge brass is created to exact dimensional standards and tolerances, using quality materials for maximum accuracy and consistency potential while extending case life.  Nosler brass also undergoes the rigorous quality control that premium Nosler bullets have experienced for over 60 years. Same quality you’ve come to expect from Nosler Custom brass, but may need some prep work before loading. This brass is new and unprimed. This is not loaded ammunition.

    CAD $171.36
  • Nosler Brass 7.62x39mm Bag of 100

    Nosler Brass 7.62x39mm Bag of 100

    Nosler Brass is manufactured with the traditional Nosler philosophy of uncompromising attention to detail. Nosler cartridge brass is created to exact dimensional standards and tolerances, using quality materials for maximum accuracy and consistency potential while extending case life.  Nosler brass also undergoes the rigorous quality control that premium Nosler bullets have experienced for over 60 years. Same quality you’ve come to expect from Nosler Custom brass, but may need some prep work before loading. This brass is new and unprimed. This is not loaded ammunition.

    CAD $171.36
  • Norma Brass Shooters Pack 7mm Remington Ultra Magnum Box of 50

    Norma Brass Shooters Pack 7mm Remington Ultra Magnum Box of 50

    Norma Shooter’s Pack brass is packaged by Norma in convenient quantities. Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition.

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $171.36

Main Menu