-
Buffalo Bore Ammunition 500 JRH (500 S&W Short) 350 Grain Jacketed Hollow Point Box of 20
Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is not intended for older guns. It is made for modern firearms only, as some of the ammunition could damage older and weaker firearms. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
This bullet is designed to expand radically at intended impact velocities into living mammalian tissues. Expect a mushroom of about .85 caliber and penetration of around 18-24 inches depending on which bones are struck. This would be the ideal load for hunting smaller big game species, where very deep penetration is not needed and the bigger wound channel from an expanded bullet is desirable, such as deer or medium size black bear. The 500 JRH cartridge was designed by gun builder Jack Huntington to fit the Freedom Arms model 83 and other similarly sized revolvers. As such, it has nearly the same case head (.006 smaller in diameter) as the 500 S&W. With its slightly smaller case head, it will fit the tight ratchet system of the Freedom Arms model 83 and will still work great in any 500 S&W firearm.
CAD $116.96 -
Buffalo Bore Ammunition 500 JRH (500 S&W Short) 440 Grain Hard Cast Lead Flat Nose Box Low Recoil Box of 20
Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is not intended for older guns. It is made for modern firearms only, as some of the ammunition could damage older and weaker firearms. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
This ammunition is designed to be a mild recoiling load that still has a high degree of utility. It will still penetrate 5 to 6 feet through muscle and bone. It will not hit as hard because of its lower velocity and therefore will not do as much damage along its path, but with that big flat nose, it will still make a 50 caliber hole along that terminal path. This bullet is hard cast, properly lubed and gas checked and will not cause lead fouling in any normally functional barrel. The 500 JRH cartridge was designed by gun builder Jack Huntington to fit the Freedom Arms model 83 and other similarly sized revolvers. As such, it has nearly the same case head (.006 smaller in diameter) as the 500 S&W. With its slightly smaller case head, it will fit the tight ratchet system of the Freedom Arms model 83 and will still work great in any 500 S&W firearm.
CAD $116.96 -
Buffalo Bore Ammunition 500 JRH (500 S&W Short) 440 Grain Hard Cast Lead Flat Nose Box of 20
Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is not intended for older guns. It is made for modern firearms only, as some of the ammunition could damage older and weaker firearms. This bullet is hard cast, properly lubed and gas checked and will not cause lead fouling in any normally functional barrel. The 500 JRH cartridge was designed by gun builder Jack Huntington to fit the Freedom Arms model 83 and other similarly sized revolvers. As such, it has nearly the same case head (.006 smaller in diameter) as the 500 S&W. With its slightly smaller case head, it will fit the tight ratchet system of the Freedom Arms model 83 and will still work great in any 500 S&W firearm. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
CAD $116.96 -
Starline Brass 500 Linebaugh
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $116.96 -
Hornady Brass 376 Steyr Box of 50
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $116.96 -
Nosler Custom Brass 6.5 Creedmoor Box of 50
Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.
CAD $116.96 -
Swift High Grade Big Game Hunting Ammunition 7mm Remington Magnum 160 Grain Swift A-Frame Box of 20
This product is High-Grade hunting ammunition from Swift. It is virtually hand crafted and hand inspected. Brass tolerances meet or exceed SAAMI specifications and each round has been individually chambered/sized to assure proper fit and is HERNON water tight sealed. With the proper selection of caliber and grain weight, whether you choose A-Frame , Scirocco or Break-Away for your hunt, you have selected the finest hunting ammunition available for use on any size game anywhere in the world.
CAD $116.96 -
Nosler Trophy Grade Ammunition 280 Ackley Improved 140 Grain AccuBond Box of 20
Nosler Trophy Grade ammunition is high quality, production-run ammunition manufactured to strict tolerances and inspected as it is hand-packaged. Trophy Grade features Nosler Custom brass and the dependable, high performing bullets you know and trust.
This Trophy Grade ammunition is loaded with Nosler’s AccuBond bonded core bullet. Through a proprietary bonding process that eliminates voids in the bullet core, AccuBond marries Nosler’s traditional copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep, won’t cause extensive barrel fouling, and will retain 60-70% of its weight. The white polymer tip helps protect against deformation while initiating expansion upon impact.
CAD $116.96 -
Remington High Performance Rifle Ammunition 32-20 WCF 100 Grain Lead Round Nose Box of 50
The classic “Green-box” ammunition that shooters and hunters have trusted for years. Remington makes ammunition for nearly every need. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
CAD $116.96 -
Buffalo Bore Ammunition 480 Ruger 410 Grain Lead Wide Flat Nose Box of 20
Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is not intended for older guns. It is made for modern firearms only, as some of the ammunition could damage older and weaker firearms. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
CAD $118.32 -
Starline Brass 40-65 WCF
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $118.32 -
Nosler Custom Brass 300 AAC Blackout Box of 50
Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.
CAD $118.32 -
Nosler Custom Brass 260 Remington Box of 50
Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.
CAD $118.32 -
Swift High Grade Big Game Hunting Ammunition 300 Winchester Magnum 180 Grain Swift A-Frame Box of 20
This product is High-Grade hunting ammunition from Swift. It is virtually hand crafted and hand inspected. Brass tolerances meet or exceed SAAMI specifications and each round has been individually chambered/sized to assure proper fit and is HERNON water tight sealed. With the proper selection of caliber and grain weight, whether you choose A-Frame , Scirocco or Break-Away for your hunt, you have selected the finest hunting ammunition available for use on any size game anywhere in the world.
CAD $118.32 -
Nosler Trophy Grade Ammunition 7mm Remington Magnum 160 Grain AccuBond Box of 20
Nosler Trophy Grade ammunition is high quality, production-run ammunition manufactured to strict tolerances and inspected as it is hand-packaged. Trophy Grade features Nosler Custom brass and the dependable, high performing bullets you know and trust.
This Trophy Grade ammunition is loaded with Nosler’s AccuBond bonded core bullet. Through a proprietary bonding process that eliminates voids in the bullet core, AccuBond marries Nosler’s traditional copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep, won’t cause extensive barrel fouling, and will retain 60-70% of its weight. The white polymer tip helps protect against deformation while initiating expansion upon impact.
CAD $118.32
- Home
- Handgun Ammunition
- 10mm Auto
- 25 ACP
- 30 Super Carry
- 32 ACP
- 32 H&R Magnum
- 32 S&W
- 32 S&W Long
- 327 Federal Magnum
- 357 Magnum
- 357 Sig
- 38 S&W
- 38 Special
- 38 Super
- 380 ACP
- 40 S&W
- 40 Super
- 400 Cor-Bon
- 41 Remington Magnum
- 44 Remington Magnum
- 44 Special
- 45 ACP
- 45 Auto Rim
- 45 Colt (Long Colt)
- 45 GAP
- 45 Super
- 45 Winchester Magnum
- 454 Casull
- 460 Rowland
- 460 S&W Magnum
- 5.7x28mm FN
- 50 Action Express
- 500 JRH
- 500 S&W Magnum
- 7.62x25mm Tokarev
- 9mm Luger
- 9mm Makarov
- 9x25mm Dillon
- Primers
- Reloading Brass
- Smokeless Powder
- Rifle Ammunition
- 17 Remington
- 204 Ruger
- 22 Hornet
- 22 Nosler
- 22-250 Remington
- 220 Swift
- 221 Fireball
- 222 Remington
- 223 Remington
- 223 Winchester Super Short Magnum
- 224 Valkyrie
- 243 Winchester
- 25-06 Remington
- 257 Roberts
- 257 Weatherby Magnum
- 260 Remington
- 264 Winchester Magnum
- 270 Weatherby Magnum
- 270 Winchester
- 270 Winchester Short Magnum
- 28 Nosler
- 280 Remington
- 280 Remington Ackley Improved 40-Degree Shoulder
- 30 Carbine
- 30 Nosler
- 30-06 Springfield
- 30-30 Winchester
- 30-378 Weatherby Magnum
- 30-40 Krag
- 300 AAC Blackout (7.62x35mm)
- 300 H&H Magnum
- 300 PRC
- 300 Remington Short Action Ultra Magnum
- 300 Remington Ultra Magnum
- 300 Savage
- 300 Weatherby Magnum
- 300 Winchester Magnum
- 300 Winchester Short Magnum
- 303 British
- 308 Winchester
- 32 Winchester Special
- 32-20 WCF
- 325 Winchester Short Magnum (WSM)
- 33 Nosler
- 338 Federal
- 338 Lapua Magnum
- 338 Remington Ultra Magnum
- 338 Winchester Magnum
- 338-06 A-Square
- 340 Weatherby Magnum
- 35 Remington
- 35 Whelen
- 350 Legend
- 358 Winchester
- 375 H&H Magnum
- 375 Ruger
- 375 SOCOM
- 38-55 WCF
- 4.6x30mm HK
- 404 Jeffery
- 416 Remington Magnum
- 416 Rigby
- 44-40 WCF
- 444 Marlin
- 45 Raptor
- 45-70 Government
- 450 Bushmaster
- 458 HAMR
- 458 Lott
- 458 SOCOM
- 458 Winchester Magnum
- 460 Weatherby Magnum
- 470 Nitro Express
- 5.56x45mm NATO
- 50 Beowulf
- 500 Auto Max
- 500 Nitro Express 3″
- 6.5 Creedmoor
- 6.5 Grendel
- 6.5 PRC
- 6.5-300 Weatherby Magnum
- 6.5mm-284 Norma
- 6.5x47mm Lapua
- 6.5x55mm Swedish Mauser
- 6.8 Western
- 6.8mm Remington SPC
- 6mm Advanced Rifle Cartridge (6mm ARC)
- 6mm Creedmoor
- 6mm Remington
- 7.62x39mm
- 7.62x51mm NATO
- 7.62x54mm Rimmed Russian
- 7mm Remington Magnum
- 7mm Remington Short Action Ultra Magnum
- 7mm Remington Ultra Magnum
- 7mm STW
- 7mm Weatherby Magnum
- 7mm-08 Remington
- 7x57mm Mauser (7mm Mauser)
- 7x64mm Brenneke
- 8mm Remington Magnum
- 8x57mm JS Mauser (8mm Mauser) (323 Dia)
- 9.3x62mm Mauser
- 9.3x74mm Rimmed
- Rimfire Ammunition
- Shotgun Ammunition