-
Hornady Brass 500 Nitro Express Box of 20
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $123.00 -
Federal Premium Ammunition 338 Lapua Magnum 300 Grain Nosler AccuBond Box of 20
Features
• High-performance polymer tip and boat-tail design for more downrange velocity and energy
• Concentric jacket improves long-range accuracy
• Core bonded to a tapered jacket for fast, controlled expansion
• Deep penetration and moderate weight retention on medium and big gameQuality hunting ammunition designed for maximum performance and reliability. Premium hunting bullets are matched with select powders, primers and brass to create a reliable, hard-hitting hunting cartridge. This ammunition is new production, non-corrosive, in boxer primed, reloadable cases.
The Nosler AccuBond represents the most advanced bonded core bullet technology to date. Through a proprietary bonding process that eliminates voids in the bullet core, AccuBond marries Nosler’s traditional copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep, won’t cause extensive barrel fouling, and will retain 60-70% of its weight. The polymer tip helps protect against deformation while initiating expansion upon impact.
CAD $123.00 -
Nosler Brass 17 Remington Fireball Bag of 100
Nosler Brass is manufactured with the traditional Nosler philosophy of uncompromising attention to detail. Nosler cartridge brass is created to exact dimensional standards and tolerances, using quality materials for maximum accuracy and consistency potential while extending case life. Nosler brass also undergoes the rigorous quality control that premium Nosler bullets have experienced for over 60 years. Same quality you’ve come to expect from Nosler Custom brass, but may need some prep work before loading. This brass is new and unprimed. This is not loaded ammunition.
CAD $123.76 -
Norma Brass Shooters Pack 7x57mm Mauser Box of 50
Norma Shooter’s Pack brass is packaged by Norma in convenient quantities. Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $123.76 -
Norma Brass Shooters Pack 264 Winchester Magnum Box of 50
Norma Shooter’s Pack brass is packaged by Norma in convenient quantities. Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $123.76 -
Federal Power-Shok Ammunition 375 H&H Magnum 300 Grain Soft Point Box of 20
Federal Power-Shok is hard hitting ammunition designed for exceptional performance in the field. A combination of premium bullets with Federal’s reputation for quality results in a hunting round that you can depend on. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
CAD $123.76 -
Nosler Trophy Grade Ammunition 264 Winchester Magnum 130 Grain AccuBond Box of 20
Nosler Trophy Grade ammunition is high quality, production-run ammunition manufactured to strict tolerances and inspected as it is hand-packaged. Trophy Grade features Nosler Custom brass and the dependable, high performing bullets you know and trust.
This Trophy Grade ammunition is loaded with Nosler’s AccuBond bonded core bullet. Through a proprietary bonding process that eliminates voids in the bullet core, AccuBond marries Nosler’s traditional copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep, won’t cause extensive barrel fouling, and will retain 60-70% of its weight. The white polymer tip helps protect against deformation while initiating expansion upon impact.
CAD $123.76 -
Lapua Brass 6mm Creedmoor
Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua’s exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $124.00 -
Starline Brass 500 S&W Magnum
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $125.12 -
Nosler Custom Brass 6.5x55mm Swedish Mauser Box of 50
Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.
CAD $125.12 -
Nosler Custom Brass 270 Winchester Short Magnum (WSM) Box of 25
Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.
CAD $125.12 -
Nosler Custom Ammunition 300 Winchester Magnum 200 Grain AccuBond Spitzer Box of 20
For over 60 years, the professionals at Nosler have been making precision bullets for competitive shooters, varmint hunters and big game hunters. Now they’ve taken Nosler premium hunting bullet technology and created a Custom line of premium ammunition with the use of new brass from popular brands from the reloading industry.
Loaded exclusively for MidwayUSA, Nosler Custom Ammunition is available in over 100 loads. The brass is cut to the exact SAAMI specifications, chamfered, deburred and the flash holes are checked for proper alignment. Primers are inspected and hand seated. The powder is hand thrown and verified for consistency. Finally the bullet is inspected and properly seated in exact alignment.
The entire loading process is personally hand-assembled by Nosler Ballisticians. The finished round is equal to the best of handloads. Loaded rounds are hand packaged in plastic ammo boxes with custom ballistic data printed in the label. This ammunition is new-production, non-corrosive in boxer-primed, reloadable brass cases.
Note: Some calibers may be loaded in commercial brass if Nosler brass is unavailable.
AccuBond represents the most advanced bonded core bullet technology to date. Through a proprietary bonding process that eliminates voids in the bullet core, AccuBond marries Nosler’s traditional copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep, retains its weight and won’t cause extensive barrel fouling, plus it retains 60-70% of it’s weight. The white polymer tip helps protect against deformation while initiating expansion upon impact.
CAD $125.12 -
Nosler Custom Ammunition 300 Winchester Magnum 165 Grain Partition Box of 20
For over 60 years, the professionals at Nosler have been making precision bullets for competitive shooters, varmint hunters and big game hunters. Now they’ve taken Nosler premium hunting bullet technology and created a Custom line of premium ammunition with the use of new brass from popular brands from the reloading industry.
Loaded exclusively for MidwayUSA, Nosler Custom Ammunition is available in over 100 loads. The brass is cut to the exact SAAMI specifications, chamfered, deburred and the flash holes are checked for proper alignment. Primers are inspected and hand seated. The powder is hand thrown and verified for consistency. Finally the bullet is inspected and properly seated in exact alignment.
The entire loading process is personally hand-assembled by Nosler Ballisticians. The finished round is equal to the best of handloads. Loaded rounds are hand packaged in plastic ammo boxes with custom ballistic data printed in the label. This ammunition is new-production, non-corrosive in boxer-primed, reloadable brass cases.CAD $125.12 -
Winchester Power Max Bonded Ammunition 325 Winchester Short Magnum (WSM) 220 Grain Protected Hollow Point Box of 20
Winchester Power Max Bonded ammunition was developed for the whitetail deer hunter seeking superior performance. Featuring a Protected Hollow Point design, this bonded bullet penetrates deep and boasts excellent weight retention. Upon impact, the bullet mushrooms to twice its original diameter delivering devastating knockdown power. Because of the remarkable qualities of the round, Winchester has stamped this ammunition as the official ammunition for whitetail hunting.
CAD $125.12 -
Browning Sporting Ammunition 12 Gauge 2-3/4″ 1-1/8 oz #8 Shot
Browning Sporting ammunition features Browning Performance Target in a convenient target pack for Sporting Clays or Trap shooting. BPT Performance Target utilizes premium, hard shot to help deliver tight patterns and maximum target breaking energy. The smooth hull allows for a sleek profile and smooth ejection. A global leader in offering quality and innovative firearms, Browning now introduces a new, full-line of superior performance ammunition for hunting, personal defense and target shooting. Browning and Winchester developed this full line of ammunition products under the Browning brand. The Browning Ammunition portfolio includes popular ammunition offerings in rifle, shotgun, handgun and rimfire, featuring advanced technologies for hunters and shooters.
Features
- High Antimony shot
- Reduced deformation at the target
- Tight, consistent patterns
CAD $125.12
- Home
- Handgun Ammunition
- 10mm Auto
- 25 ACP
- 30 Super Carry
- 32 ACP
- 32 H&R Magnum
- 32 S&W
- 32 S&W Long
- 327 Federal Magnum
- 357 Magnum
- 357 Sig
- 38 S&W
- 38 Special
- 38 Super
- 380 ACP
- 40 S&W
- 40 Super
- 400 Cor-Bon
- 41 Remington Magnum
- 44 Remington Magnum
- 44 Special
- 45 ACP
- 45 Auto Rim
- 45 Colt (Long Colt)
- 45 GAP
- 45 Super
- 45 Winchester Magnum
- 454 Casull
- 460 Rowland
- 460 S&W Magnum
- 5.7x28mm FN
- 50 Action Express
- 500 JRH
- 500 S&W Magnum
- 7.62x25mm Tokarev
- 9mm Luger
- 9mm Makarov
- 9x25mm Dillon
- Primers
- Reloading Brass
- Smokeless Powder
- Rifle Ammunition
- 17 Remington
- 204 Ruger
- 22 Hornet
- 22 Nosler
- 22-250 Remington
- 220 Swift
- 221 Fireball
- 222 Remington
- 223 Remington
- 223 Winchester Super Short Magnum
- 224 Valkyrie
- 243 Winchester
- 25-06 Remington
- 257 Roberts
- 257 Weatherby Magnum
- 260 Remington
- 264 Winchester Magnum
- 270 Weatherby Magnum
- 270 Winchester
- 270 Winchester Short Magnum
- 28 Nosler
- 280 Remington
- 280 Remington Ackley Improved 40-Degree Shoulder
- 30 Carbine
- 30 Nosler
- 30-06 Springfield
- 30-30 Winchester
- 30-378 Weatherby Magnum
- 30-40 Krag
- 300 AAC Blackout (7.62x35mm)
- 300 H&H Magnum
- 300 PRC
- 300 Remington Short Action Ultra Magnum
- 300 Remington Ultra Magnum
- 300 Savage
- 300 Weatherby Magnum
- 300 Winchester Magnum
- 300 Winchester Short Magnum
- 303 British
- 308 Winchester
- 32 Winchester Special
- 32-20 WCF
- 325 Winchester Short Magnum (WSM)
- 33 Nosler
- 338 Federal
- 338 Lapua Magnum
- 338 Remington Ultra Magnum
- 338 Winchester Magnum
- 338-06 A-Square
- 340 Weatherby Magnum
- 35 Remington
- 35 Whelen
- 350 Legend
- 358 Winchester
- 375 H&H Magnum
- 375 Ruger
- 375 SOCOM
- 38-55 WCF
- 4.6x30mm HK
- 404 Jeffery
- 416 Remington Magnum
- 416 Rigby
- 44-40 WCF
- 444 Marlin
- 45 Raptor
- 45-70 Government
- 450 Bushmaster
- 458 HAMR
- 458 Lott
- 458 SOCOM
- 458 Winchester Magnum
- 460 Weatherby Magnum
- 470 Nitro Express
- 5.56x45mm NATO
- 50 Beowulf
- 500 Auto Max
- 500 Nitro Express 3″
- 6.5 Creedmoor
- 6.5 Grendel
- 6.5 PRC
- 6.5-300 Weatherby Magnum
- 6.5mm-284 Norma
- 6.5x47mm Lapua
- 6.5x55mm Swedish Mauser
- 6.8 Western
- 6.8mm Remington SPC
- 6mm Advanced Rifle Cartridge (6mm ARC)
- 6mm Creedmoor
- 6mm Remington
- 7.62x39mm
- 7.62x51mm NATO
- 7.62x54mm Rimmed Russian
- 7mm Remington Magnum
- 7mm Remington Short Action Ultra Magnum
- 7mm Remington Ultra Magnum
- 7mm STW
- 7mm Weatherby Magnum
- 7mm-08 Remington
- 7x57mm Mauser (7mm Mauser)
- 7x64mm Brenneke
- 8mm Remington Magnum
- 8x57mm JS Mauser (8mm Mauser) (323 Dia)
- 9.3x62mm Mauser
- 9.3x74mm Rimmed
- Rimfire Ammunition
- Shotgun Ammunition