-
Lapua Brass 6.5x47mm Lapua Box of 100
Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua’s exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $159.00 -
Lapua Brass 8x57mm JS Mauser (8mm Mauser) Box of 100
Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua’s exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. This is not loaded ammunition.
What Mauser Ammo and Reloading Components do I need?
MidwayUSA carries JS and JRS 8x57mm (8mm Mauser) ammunition and brass. The standard 8x57mm JS Mauser is by far the most common version of this cartridge, used in military and sporting bolt action rifles. The less-common JRS Mauser is a rimmed cartridge developed for double barrel rifles. If you have a bolt action 8mm Mauser, you will want 8x57mm JS Mauser ammunition and components.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $159.00 -
Starline Brass 458 SOCOM
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $159.12 -
Nosler E-Tip Ammunition 300 Weatherby Magnum 180 Grain Polymer Tip Lead Free Box of 20
Nosler E-Tip ammunition is high quality, production-run ammunition manufactured to strict tolerances and inspected as it is hand-packaged. Nosler Ammunition features Nosler Custom brass and the dependable, high performing bullets you know and trust. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Nosler’s E-Tip lead-free bullet features the same polycarbonate tip found on the popular AccuBond and Ballistic Tip bullets that prevents deformation in the magazine, boosts aerodynamic efficiency, and initiates expansion. A precisely formed boat-tail reduces drag delivering more down range energy. Specially designed Energy Expansion Cavity allows for immediate and uniform expansion while retaining 95%+ weight for improved penetration. Patent pending alloy reduces fouling while providing superior accuracy and consistent performance.
Features
- OD Green polymer tip initiates expansion immediately upon impact
- One-piece construction for high weight retention and deep penetration
- Certified for use in lead free areas
CAD $159.12 -
Nosler Match Grade Ammunition 28 Nosler 185 Grain RDF Hollow Point Boat Tail Box of 20
Nosler Match Grade Ammunition is loaded using Nosler Custom Brass and meticulously weighed powder along with trusted Nosler Bullets. The brass goes through intense quality checks and is inspected for correct length, neck-sized, chamfered, trued, and the flash holes are checked for proper alignment. The resulting ammunition delivers extreme accuracy and consistency unlike many other factory loads.
For those wanting to squeeze the most performance from their competition rifle, Nosler’s RDF (Reduced Drag Factor) match bullet line is the ideal choice. Nosler’s RDF line was designed from the ground up to provide exceptionally high BCs, which create the flattest trajectory and least wind drift possible. The keys to the RDF’s outstanding performance are Nosler’s meticulously optimized compound ogive and long, drag reducing boattail which creates an incredibly sleek form factor. RDF bullets also have the smallest, most consistent meplats of any hollow point match bullet line, so there is no need to point or trim tips.
CAD $159.12 -
Weatherby Brass 6.5-300 Weatherby Magnum
Produced exclusively for Weatherby by Norma Precision. Brass has CNC-machined primer pockets and is made to match-grade specifications. New unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $159.30 -
Weatherby Brass 257 Weatherby Magnum
Weatherby Brass has CNC-machined primer pockets and is made to match-grade specifications. New unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $159.30 -
HSM Pro Pistol Hunter Ammunition 454 Casull 300 Grain Sierra Jacketed Soft Point Box of 50
HSM has become known as one of the top ammunition manufacturers in the country. HSM utilizes the highest quality components to offer extremely consistent, accurate, and high performing ammunition to shooters, hunters, and law enforcement. The Pro Pistol Hunter line of ammunition is suitable for hunters who want to carry a pistol into the field. The moderate recoil and excellent accuracy of this ammunition will satisfy all shooters regardless of application. The Sierra bullets are engineered to provide consistent, reliable expansion over a wide range of velocities. The featured Power Jacket insures unform expansion along serrated lines. This directly results in more consistent weight retention and the maximum energy transfer. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
CAD $160.48 -
Nosler Custom Brass 222 Remington Box of 100
Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.
CAD $160.48 -
Nosler Custom Brass 8x57mm JS (8mm Mauser) Box of 50
Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.
CAD $160.48 -
Hornady Dangerous Game Ammunition 375 H&H Magnum 300 Grain DGX Bonded Box of 20
From African big game to the American Grizzly Bear, Hornady’s Dangerous Game ammunition provides the shooter an exceptional load with more energy transfer and lots of knockdown power. The Hornady Dangerous Game Expanding bullets are designed for taking down the world’s toughest and biggest game animals. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
The DGX Bonded (Dangerous Game eXpanding) bullet features a copper-clad steel jacket bonded to a lead core to provide limited, controlled expansion with deep penetration and high weight retention. Bonding the jacket to the core prevents separation from high-energy impact on tough material like bone, ensuring the bullet stays together for deep expansion. DGX Bonded bullets are built to the same profile as the corresponding DGS (Dangerous Game Solid) bullets but expand to 1½ to 2 times their bullet diameter.
CAD $160.48 -
Hornady Dangerous Game Superformance Ammunition 375 H&H Magnum 270 Grain Spire Point Recoil Proof Box of 20
Superformance ammunition is loaded with proprietary propellants that increase the velocity ratings up to 200 feet per second compared to other popular brands. Because there is no increase in pressure, regardless of the caliber, there is no increase in felt recoil but there IS an increase in efficiency and high speed performance. From sub-zero arctic temperatures to almost unbearable desert heat, Superformance ammunition can withstand any hunting habitat.
The Spire Point – Recoil Proof bullet is simply Hornady’s InterLock Spire Point bullet with the unique ring that ensure the core and jacket remain locked together during expansion. The InterLock retains more mass, energy and momentum after impact and transfers that energy to the target. The exposed lead tip is flush with the jacket. The fact that it’s Recoil Proof helps large calibers and also assists with premature mushrooming.
CAD $160.48 -
Swift High Grade Dangerous Game Hunting Ammunition 375 H&H Magnum 300 Grain Swift A-Frame Box of 20
This product is High-Grade hunting ammunition from Swift. It is virtually hand crafted and hand inspected. Brass tolerances meet or exceed SAAMI specifications and each round has been individually chambered/sized to assure proper fit and is HERNON water tight sealed. With the proper selection of caliber and grain weight, whether you choose A-Frame , Scirocco or Break-Away for your hunt, you have selected the finest hunting ammunition available for use on any size game anywhere in the world.
CAD $160.48 -
Top Brass Premium Reconditioned Once Fired Brass 9mm Luger
Top Brass specializes in purchasing once-fired military brass from the Department of Defense and performing every step necessary to bring it back to ideal reloading condition. Stringent inspection processes at every step ensures the tightest tolerances and most consistent product possible with once-fired brass, no matter the caliber. The thorough visual inspection process prior to packaging helps to make sure you get only the highest quality product so you can buy with confidence. This is 100% fully processed & reconditioned Brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
Features
- Deprimed
- Cleaned
- Full-length sized
CAD $160.65 -
Once Fired Brass 7.62x51mm NATO and 308 Winchester Grade 2 Box of 250 (Bulk Packaged)
This brass comes from indoor ranges and may have minor dings, dents or slight imperfections. Most flaws can be easily removed upon resizing or will be shot out upon the first firing. This brass is mostly military 7.62x51mm, has not been re-sized and must be full-length sized and trimmed before loading the first time. Grade 2 Brass has been tumbled but not yet deprimed. Brass is sold as-is.
CAD $160.65
- Home
- Handgun Ammunition
- 10mm Auto
- 25 ACP
- 30 Super Carry
- 32 ACP
- 32 H&R Magnum
- 32 S&W
- 32 S&W Long
- 327 Federal Magnum
- 357 Magnum
- 357 Sig
- 38 S&W
- 38 Special
- 38 Super
- 380 ACP
- 40 S&W
- 40 Super
- 400 Cor-Bon
- 41 Remington Magnum
- 44 Remington Magnum
- 44 Special
- 45 ACP
- 45 Auto Rim
- 45 Colt (Long Colt)
- 45 GAP
- 45 Super
- 45 Winchester Magnum
- 454 Casull
- 460 Rowland
- 460 S&W Magnum
- 5.7x28mm FN
- 50 Action Express
- 500 JRH
- 500 S&W Magnum
- 7.62x25mm Tokarev
- 9mm Luger
- 9mm Makarov
- 9x25mm Dillon
- Primers
- Reloading Brass
- Smokeless Powder
- Rifle Ammunition
- 17 Remington
- 204 Ruger
- 22 Hornet
- 22 Nosler
- 22-250 Remington
- 220 Swift
- 221 Fireball
- 222 Remington
- 223 Remington
- 223 Winchester Super Short Magnum
- 224 Valkyrie
- 243 Winchester
- 25-06 Remington
- 257 Roberts
- 257 Weatherby Magnum
- 260 Remington
- 264 Winchester Magnum
- 270 Weatherby Magnum
- 270 Winchester
- 270 Winchester Short Magnum
- 28 Nosler
- 280 Remington
- 280 Remington Ackley Improved 40-Degree Shoulder
- 30 Carbine
- 30 Nosler
- 30-06 Springfield
- 30-30 Winchester
- 30-378 Weatherby Magnum
- 30-40 Krag
- 300 AAC Blackout (7.62x35mm)
- 300 H&H Magnum
- 300 PRC
- 300 Remington Short Action Ultra Magnum
- 300 Remington Ultra Magnum
- 300 Savage
- 300 Weatherby Magnum
- 300 Winchester Magnum
- 300 Winchester Short Magnum
- 303 British
- 308 Winchester
- 32 Winchester Special
- 32-20 WCF
- 325 Winchester Short Magnum (WSM)
- 33 Nosler
- 338 Federal
- 338 Lapua Magnum
- 338 Remington Ultra Magnum
- 338 Winchester Magnum
- 338-06 A-Square
- 340 Weatherby Magnum
- 35 Remington
- 35 Whelen
- 350 Legend
- 358 Winchester
- 375 H&H Magnum
- 375 Ruger
- 375 SOCOM
- 38-55 WCF
- 4.6x30mm HK
- 404 Jeffery
- 416 Remington Magnum
- 416 Rigby
- 44-40 WCF
- 444 Marlin
- 45 Raptor
- 45-70 Government
- 450 Bushmaster
- 458 HAMR
- 458 Lott
- 458 SOCOM
- 458 Winchester Magnum
- 460 Weatherby Magnum
- 470 Nitro Express
- 5.56x45mm NATO
- 50 Beowulf
- 500 Auto Max
- 500 Nitro Express 3″
- 6.5 Creedmoor
- 6.5 Grendel
- 6.5 PRC
- 6.5-300 Weatherby Magnum
- 6.5mm-284 Norma
- 6.5x47mm Lapua
- 6.5x55mm Swedish Mauser
- 6.8 Western
- 6.8mm Remington SPC
- 6mm Advanced Rifle Cartridge (6mm ARC)
- 6mm Creedmoor
- 6mm Remington
- 7.62x39mm
- 7.62x51mm NATO
- 7.62x54mm Rimmed Russian
- 7mm Remington Magnum
- 7mm Remington Short Action Ultra Magnum
- 7mm Remington Ultra Magnum
- 7mm STW
- 7mm Weatherby Magnum
- 7mm-08 Remington
- 7x57mm Mauser (7mm Mauser)
- 7x64mm Brenneke
- 8mm Remington Magnum
- 8x57mm JS Mauser (8mm Mauser) (323 Dia)
- 9.3x62mm Mauser
- 9.3x74mm Rimmed
- Rimfire Ammunition
- Shotgun Ammunition