• Top Brass Premium Reconditioned Once Fired Brass 40 S&W

    Top Brass Premium Reconditioned Once Fired Brass 40 S&W

    Top Brass specializes in purchasing once-fired military brass from the Department of Defense and performing every step necessary to bring it back to ideal reloading condition. Stringent inspection processes at every step ensures the tightest tolerances and most consistent product possible with once-fired brass, no matter the caliber. The thorough visual inspection process prior to packaging helps to make sure you get only the highest quality product so you can buy with confidence. This is 100% fully processed & reconditioned Brass. This is not loaded ammunition.

     

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

     

    Features

    • Deprimed
    • Cleaned
    • Full-length sized
    CAD $58.05
  • Top Brass Premium Reconditioned Once Fired Brass 50 BMG

    Top Brass Premium Reconditioned Once Fired Brass 50 BMG

    Top Brass specializes in purchasing once-fired military brass from the Department of Defense and performing every step necessary to bring it back to ideal reloading condition. Stringent inspection processes at every step ensures the tightest tolerances and most consistent product possible with once-fired brass, no matter the caliber. The thorough visual inspection process prior to packaging helps to make sure you get only the highest quality product so you can buy with confidence. This is 100% fully processed & reconditioned Brass. This is not loaded ammunition.

     

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

     

    Features

    • Deprimed
    • Cleaned
    • Full-length sized
    CAD $195.75
  • Top Brass Premium Reconditioned Once Fired Brass 9mm Luger

    Top Brass Premium Reconditioned Once Fired Brass 9mm Luger

    Top Brass specializes in purchasing once-fired military brass from the Department of Defense and performing every step necessary to bring it back to ideal reloading condition. Stringent inspection processes at every step ensures the tightest tolerances and most consistent product possible with once-fired brass, no matter the caliber. The thorough visual inspection process prior to packaging helps to make sure you get only the highest quality product so you can buy with confidence. This is 100% fully processed & reconditioned Brass. This is not loaded ammunition.

     

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

     

    Features

    • Deprimed
    • Cleaned
    • Full-length sized
    CAD $160.65
  • Triple Seven® 45/50 Pellets

    Triple Seven® 45/50 Pellets

    Triple Seven 45/50 Pellets are 45-caliber, 50 grain pellets designed for in-line 45 caliber rifles. As with all Triple Seven products, clean-up is quick and easy with plain water.

    These pellets may be used in 45 caliber rifles with saboted 40 caliber bullets for game from squirrel to deer. Designed for use with 209 shotshelll primers only.

    Available in a 50-pellet box.

    CAD $46.23

    Triple Seven® 45/50 Pellets

    CAD $46.23 Select options This product has multiple variants. The options may be chosen on the product page
  • Triple Seven® 50 50/60 Magnum Pellets

    Triple Seven® 50 50/60 Magnum Pellets

    Triple Seven 50/60 pellets are 50-caliber, 60-grain pellets designed for use in 50-caliber, inline rifles. Two Triple Seven Magnums can be used to achieve an additional 200-250 fps. In 26″ in-line barrels this will normally result in muzzle velocity of approximately 2,000 fps.

    CAD $44.87

    Triple Seven® 50 50/60 Magnum Pellets

    CAD $44.87 Select options This product has multiple variants. The options may be chosen on the product page
  • Triple Seven® 50/30 Pellets

    Triple Seven® 50/30 Pellets

    Triple Seven 50/30 is a 50-caliber, 30-grain pellet designed for use in conjunction with 50/50 pellets to tailor loads specific to a given rifle. The 50/30 Pellets may be used in any combination with 50/50 or other 50/30 pellets in charges up to a maximum of 100 grains.

    Easy clean-up, just like Triple Seven granular powder. Designed for use with 209 shotshell primers only.

    CAD $54.39

    Triple Seven® 50/30 Pellets

    CAD $54.39 Select options This product has multiple variants. The options may be chosen on the product page
  • Triple Seven® 50/50 Pellets

    Triple Seven® 50/50 Pellets

    Triple Seven 50/50 pellets are 50-caliber, 50-grain pellets designed for use in 50-caliber, in-line rifles. A single pellet may be used for target or small game and two pellets may be used to create the 100 gr. equivalent for big game.

    Easy clean-up, just like Triple Seven granular powder.

    Designed for use with 209 shotshelll primers only.

    Price range: CAD $27.19 through CAD $54.39

    Triple Seven® 50/50 Pellets

    Price range: CAD $27.19 through CAD $54.39 Select options This product has multiple variants. The options may be chosen on the product page
  • Triple Seven® FFFG Granular Powder

    Triple Seven® FFFG Granular Powder

    Same great powder as FFG, FFFG is designed for use in pistols and rifles of 50 caliber and smaller. Easy clean-up with this one – just like standard Triple Seven.

    Available in a 1-LB container.

    CAD $58.47

    Triple Seven® FFFG Granular Powder

    CAD $58.47 Select options This product has multiple variants. The options may be chosen on the product page
  • Triple Seven® FFG Granular Powder

    Triple Seven® FFG Granular Powder

    Designed for shotguns and rifles, 50-caliber and larger, as well as cartridges. FFG is also usable in muskets and large-bore pistols.

    Hodgdon’s revolutionary granulated muzzleloading propellant that cleans up with water alone. Contains no sulfur, so there are no strong smells and clean-up is a breeze.

    CAD $54.39

    Triple Seven® FFG Granular Powder

    CAD $54.39 Select options This product has multiple variants. The options may be chosen on the product page
  • Triple Seven® FireStar® Pellets

    Triple Seven® FireStar® Pellets

    This pellet is designed for a 50-caliber inline muzzleloader used with a 209 primer. Features revolutionary design utilizing geometric star- shape to deliver:

    • Cleaner Burning – More shots between cleaning

    • Higher Velocity – Gain up to 50 FPS

    • More Efficient – Longitudinal grooves provide more surface area for ignition

    Available in a 60-pellet hang-or-stand clam pack.

    CAD $40.79

    Triple Seven® FireStar® Pellets

    CAD $40.79 Select options This product has multiple variants. The options may be chosen on the product page
  • True Velocity Ammunition 308 Winchester 165 Grain Nosler AccuBond Composite Case Box of 20

    True Velocity Ammunition 308 Winchester 165 Grain Nosler AccuBond Composite Case Box of 20

    True Velocity manufactures lightweight, extremely accurate composite-cased ammunition. True Velocity’s precision engineering and manufacturing capabilities allow for substantial improvements in consistency over brass. The proprietary technology and manufacturing process, combined with progressive process and quality control standards and an ethos of excellence, yields a cartridge of unparalleled performance. True Velocity has identified more than 30 distinct advantages of composite cases over brass. In particular, the cartridge case offers a substantial reduction in weight, reduced heat transfer to weapons, significantly enhanced accuracy, more consistent muzzle velocity, reduced muzzle flash, and more efficient powder burn, as compared to brass cartridge cases. True Velocity cartridges cases are magnetically retrievable, reducing the time required for range clean-up and eliminating end-user exposure to heavy metals and toxic gases produced by spent brass cases. True Velocity ammunition is not designed to be reloaded using commercially available reloading equipment.

     

    This ammunition is loaded with Nosler’s AccuBond bonded core polymer tipped hunting bullet. Through a proprietary bonding process that eliminates voids in the bullet core, AccuBond marries Nosler’s traditional copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep, won’t cause extensive barrel fouling, and will retain 60-70% of its weight. The white polymer tip helps protect against deformation while initiating expansion upon impact.

     

    Features

    • 30% Lighter than loaded brass
    • Increased accuracy
    • Reduced heat transfer
    • Magnetic retrieval
    • 100% Recyclable
    CAD $93.84
  • True Velocity Ammunition 308 Winchester 168 Grain Nosler Custom Competition Hollow Point Boat Tail Composite Case Box of 20

    True Velocity Ammunition 308 Winchester 168 Grain Nosler Custom Competition Hollow Point Boat Tail Composite Case Box of 20

    True Velocity manufactures lightweight, extremely accurate composite-cased ammunition. True Velocity’s precision engineering and manufacturing capabilities allow for substantial improvements in consistency over brass. The proprietary technology and manufacturing process, combined with progressive process and quality control standards and an ethos of excellence, yields a cartridge of unparalleled performance. True Velocity has identified more than 30 distinct advantages of composite cases over brass. In particular, the cartridge case offers a substantial reduction in weight, reduced heat transfer to weapons, significantly enhanced accuracy, more consistent muzzle velocity, reduced muzzle flash, and more efficient powder burn, as compared to brass cartridge cases. True Velocity cartridges cases are magnetically retrievable, reducing the time required for range clean-up and eliminating end-user exposure to heavy metals and toxic gases produced by spent brass cases. True Velocity ammunition is not designed to be reloaded using commercially available reloading equipment.

     

    Nosler Custom Competition bullets blend match winning accuracy and consistency with maximum value for performance-minded shooters. Highly concentric jackets, ultra precise lead alloy cores and hand inspected quality offer competitive shooters more, for less. The small meplat, provided by the hollow point, results in reduced drag and increased aerodynamic efficiency.

     

    Features

    • 30% Lighter than loaded brass
    • Increased accuracy
    • Reduced heat transfer
    • Magnetic retrieval
    • 100% Recyclable
    CAD $93.84
  • True Velocity Ammunition 308 Winchester 168 Grain Sierra MatchKing Hollow Point Box of 20

    True Velocity Ammunition 308 Winchester 168 Grain Sierra MatchKing Hollow Point Box of 20

    True Velocity manufactures lightweight, extremely accurate composite-cased ammunition. True Velocity’s precision engineering and manufacturing capabilities allow for substantial improvements in consistency over brass. The proprietary technology and manufacturing process, combined with progressive process and quality control standards and an ethos of excellence, yields a cartridge of unparalleled performance. True Velocity has identified more than 30 distinct advantages of composite cases over brass. In particular, the cartridge case offers a substantial reduction in weight, reduced heat transfer to weapons, significantly enhanced accuracy, more consistent muzzle velocity, reduced muzzle flash, and more efficient powder burn, as compared to brass cartridge cases. True Velocity cartridges cases are magnetically retrievable, reducing the time required for range clean-up and eliminating end-user exposure to heavy metals and toxic gases produced by spent brass cases. True Velocity ammunition is not designed to be reloaded using commercially available reloading equipment.

     

    This ammunition is loaded with Sierra MatchKing bullets. Sierra MatchKing bullets have very thin jackets and are held to exacting tolerances in diameter and weight. These Hollow Point Boat Tail bullets have a small meplat to produce a higher ballistic coefficient. Their accuracy has been acclaimed worldwide and they have been used to win more target competitions than all target bullets from other manufacturers combined.

     

    Features

    • 30% Lighter than loaded brass
    • Increased accuracy
    • Reduced heat transfer
    • Magnetic retrieval
    • 100% Recyclable
    CAD $93.84
  • True Velocity Ammunition 308 Winchester 175 Grain Sierra MatchKing Hollow Point Box of 20

    True Velocity Ammunition 308 Winchester 175 Grain Sierra MatchKing Hollow Point Box of 20

    True Velocity manufactures lightweight, extremely accurate composite-cased ammunition. True Velocity’s precision engineering and manufacturing capabilities allow for substantial improvements in consistency over brass. The proprietary technology and manufacturing process, combined with progressive process and quality control standards and an ethos of excellence, yields a cartridge of unparalleled performance. True Velocity has identified more than 30 distinct advantages of composite cases over brass. In particular, the cartridge case offers a substantial reduction in weight, reduced heat transfer to weapons, significantly enhanced accuracy, more consistent muzzle velocity, reduced muzzle flash, and more efficient powder burn, as compared to brass cartridge cases. True Velocity cartridges cases are magnetically retrievable, reducing the time required for range clean-up and eliminating end-user exposure to heavy metals and toxic gases produced by spent brass cases. True Velocity ammunition is not designed to be reloaded using commercially available reloading equipment.

     

    This ammunition is loaded with Sierra MatchKing bullets. Sierra MatchKing bullets have very thin jackets and are held to exacting tolerances in diameter and weight. These Hollow Point Boat Tail bullets have a small meplat to produce a higher ballistic coefficient. Their accuracy has been acclaimed worldwide and they have been used to win more target competitions than all target bullets from other manufacturers combined.

     

    Features

    • 30% Lighter than loaded brass
    • Increased accuracy
    • Reduced heat transfer
    • Magnetic retrieval
    • 100% Recyclable
    CAD $93.84
  • Underwood Ammunition 10mm Auto 135 Grain Jacketed Hollow Point Box of 20

    Underwood Ammunition 10mm Auto 135 Grain Jacketed Hollow Point Box of 20

    While taking advantage of state of the art testing equipment, this high performance ammunition by underwood is field tested using popular, real firearms that customers are most likely to own out in the real world with all the elements you would experience. If for some reason Underwood Ammunition fails to meet performance expectations, Underwood stands by their product 100% and will make sure the customer is satisfied with every purchase. This ammunition is new production, non-corrosive, in boxer primed, reloadable nickel plated brass cases.

     

    Whether shooting steel targets or hunting for a hog, Nosler’s Sporting Handgun bullets will perform exceptional in both situations. Designed with a tapered copper alloy jacket and form fitted lead core, these bullets were built for extreme accuracy and reliable expansion at broad ranges. Each bullet is hand-inspected and burnished to a bright finish. All of Underwood Ammo rounds utilize flash suppressed powder so that your vision will not be compromised if it becomes necessary to use your firearm in low light.

     

    The Underwood nickel plating process provides several key benefits including; improved feeding in all actions of firearms, enhanced corrosion resistance over traditional brass, improved cosmetics, and ease of cleanup during reloading. Nickel plated casings will not tarnish like brass during storage or when in contact with foreign materials such as leather, moisture, and other metals. Until the development of the Ducta-Bright 7a process, nickel plating casings often limited the number of reloads as compared to raw brass. It was claimed that nickel plated brass casings embrittled the brass therefor making it less desirable for reloaders despite the ease of cleanup that nickel plating offers. In addition, ammunition engineers raising concerns of using nickel plating in very hot +P or magnum loads found that traditional nickel plating often cracked deep-drawn cases, or worse, lead to a total failure. This new process eliminates any concern, to the shooter or reloader, of hazard or ability to re-use the brass.

    CAD $31.28

Main Menu