Buffalo Bore Anti-Personnel ammunition is loaded with the highest quality components to produce great accuracy and performance. This load was designed for use in any firearm chambered in 45 Colt. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

Owner of Buffalo Bore Tim Sundles on Anti-Personnel 45 Colt Ammunition:

This load is designed to cause disabling terminal effect, combined with the penetration required to cause fast incapacitation of targets from any angle. The big flat wad cutter nose crushes living tissue as it passes through, unlike mushroomed bullets that are slightly rounded on the nose and tend to slip and slide through living material. The crushing action of the flat nose keeps penetration straight and thus deep. The hard cast construction will not deform on flesh and bone at these velocities so the nose profile remains constant along with bullet path and terminal damage. Full wad cutter profiles in large calibers (like .45 and .44) hit like a truck and do massive permanent damage. Noted NYPD stake out officer and gun fighter Jim Cirillo used full wad cutters in his 38 SPL revolvers because they incapacitated his targets with certainty.

Expect about 24 inches of straight-line penetration with this load.

We test our ammunition in real world over-the-counter firearms to establish our published velocities so that our customers can know what this ammunition is doing in the real world, not a laboratory where long test barrels are used and give false high velocity readings. See our below velocities fired from my personal firearms.

• 1.1057 fps – Ruger Vaquero 2006 large frame 5.5 inch barrel
• 2.1062 fps – Freedom Arms mod. 97 5.25 inch barrel
• 3. 951 fps – S&W MT. Gun 4 inch barrel
• 4. 850 fps – Taurus Titanium 2 inch barrel

This load is standard pressure and is therefore safe for use in ANY/ALL 45 Colt and 454 Casull firearms. The bullet construction is hard cast (not lead) and properly lubed and will not substantially lead your barrel, even if you fire hundreds of rounds.

Grizzly Cartridge Company was founded in 2003 with an inherent focus on quality and innovation. Each step of the manufacturing process undergoes strict personal inspection by the company’s founder to ensure the absolute best product possible.

This ammunition is loaded with a Cast Performance Wide Flat Nose Gas Check bullet. Cast from virgin alloy, Cast Performance bullets are produced in extremely precise and consistent LBT style molds. Optimal hardness from heat-treating prevents fragmentation on even the toughest hide and bone. All Grizzly Handgun ammunition is loaded with flash-suppressed powder. New production, non-corrosive in reloadable brass cases.

Buffalo Bore Dangerous Game ammunition is a line of mono-metal,  non-expanding, dangerous game loads. These “Dangerous Game” (DG) loads are super high quality, very powerful, and will live up to their namesake. Mono-metal bullets have a few advantages (a couple of disadvantages too) over typical non-expanding hard cast bullets. These advantages may or may not be meaningful to each individual, depending on your usage. The advantages are that they are cleaner burning/firing than hard cast bullets. Also, hard cast bullets can smear their nose profile when they hit large bones at close range/high velocity. When the flat nose smears and changes shape, it can impact straight line penetration. The disadvantages are cost and case capacity issues, mono-metal bullets made of copper or brass alloys are lightweight for their length.

Buffalo Bore loads their ammunition with the highest quality components available to maximize the performance of the ammunition. This ammunition is safe to use in all modern firearms that are in proper working condition. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

Developed as a load to protect hunters while hunting or traveling in bear country, this American made ammunition is sure to keep you safe with its extreme terminal performance and stopping power. HSM Bear Ammunition is loaded with high-quality, dependable components delivering drastically higher velocities when compared to standard loads. Trust HSM Bear loads for your protection from dangerous game.

Sellier and Bellot has been producing cartridge ammunition since 1825. The year 2009 saw one of the milestones in the history of the company, the Brazilian company Companhia Brasileira de Cartuchos S.A. (CBC), also known under the name of Magtech, became the owner of Sellier & Bellot. Another group member is the German company MEN, a globally renowned producer of small-arms ammunition for the military, police, and commercial markets. Due to the merger into one group, the mentioned companies have become more competitive and rank among the largest producers in the world.

Today Sellier and Bellot produce ammunition using high quality components which is the choice of hunters, competitive shooters, law enforcement agencies and militaries around the world. The lead flat nose bullet is not jacketed to provide expansion on target. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

Barnes bullets have historically had the reputation of offering quick, clean and humane kills. Now they are taking their highly regarded bullets to the next level loading them in ammunition.

Borrowing technology from the highly successful X Bullet, Barnes offers an all-copper pistol bullet. This new bullet is sure to change the face of pistol hunting forever. The Barnes XPB pistol bullet will deliver more energy than any other bullet available for handguns. In testing, penetration has been increased up to 25% over lead-core bullets, while remaining intact to expand like no other bullet in the world.

VOR-TX ammunition is manufactured to precise tolerances to ensure excellent accuracy and consistent velocities. This ammunition is new production, non-corrosive, in boxer-primed, reloadable brass cases.

While taking advantage of state of the art testing equipment, this high performance ammunition by Underwood is field tested using popular, real firearms that customers are most likely to own out in the real world with all the elements you would experience. If for some reason Underwood Ammunition fails to meet performance expectations, Underwood stands by their product 100% and will make sure the customer is satisfied with every purchase. This ammunition is new production, non-corrosive, in boxer primed, reloadable nickel-plated brass cases.

The Underwood nickel plating process provides several key benefits including; improved feeding in all actions of firearms, enhanced corrosion resistance over traditional brass, improved cosmetics, and ease of cleanup during reloading. Nickel plated casings will not tarnish like brass during storage or when in contact with foreign materials such as leather, moisture, and other metals. Until the development of the Ducta-Bright 7a process, nickel plating casings often limited the number of reloads as compared to raw brass. It was claimed that nickel plated brass casings embrittled the brass therefor making it less desirable for reloaders despite the ease of cleanup that nickel plating offers. In addition, ammunition engineers raising concerns of using nickel plating in very hot +P or magnum loads found that traditional nickel plating often cracked deep-drawn cases, or worse, lead to a total failure. This new process eliminates any concern, to the shooter or reloader, of hazard or ability to re-use the brass.

The Lehigh Xtreme Penetrator bullet features progressive nose geometry, which allows for deep, straight penetration while creating a permanent wound cavity diameter exceeding that of most expanding bullets. To top it off, the bullet is solid copper and is able to overcome barriers to penetration; environmentally friendly, target unfriendly, very unfriendly, downright obnoxiously unfriendly. The magic happens with the nose design where the radial flutes force the hydraulic energy inward and then as the energy is restricted, it accelerates outward creating high pressure spikes damaging surrounding tissue. Kind of similar to sticking your thumb over a garden hose. The permanent wound cavity of the XP is from two to four times greater than what a flat or ball nose bullet generates and often larger than traditional expanding bullets. So what you get is exceptional penetration coupled with a larger permanent wound cavity. The solid copper alloy construction will not deform when contacting hard surfaces like a lead jacketed bullet will do nor will it fragment as some hard cast lead bullets are prone to do. What it will do is overcome surface barriers and penetrate straight and deep while creating a massive wound channel.

Suppressor Safe— The projectile is machined from solid bar stock. This is not a frangible bullet produced from powdered metal.

Features

• Progressive nose geometry for deep, straight penetration
• CNC machined from solid copper to overcome barriers to penetration
• Radial flutes that force the hydraulic energy inward to build pressure
• A permanent wound cavity that is 2 to 4 times greater than flat or ball nose bullets

While taking advantage of state of the art testing equipment, this high performance ammunition by Underwood is field tested using popular, real firearms that customers are most likely to own out in the real world with all the elements you would experience. If for some reason Underwood Ammunition fails to meet performance expectations, Underwood stands by their product 100% and will make sure the customer is satisfied with every purchase. This ammunition is new production, non-corrosive, in boxer primed, reloadable nickel plated brass cases.

The Xtreme Defender is based on the popular Xtreme Penetrator product line. The XD ammunition has an optimized nose flute, total weight, and velocity to achieve a penetration depth up to 18 inches with a permanent wound cavity (PWC) that is just simply enormous; no other expanding hollow point comes close to achieving anywhere near this diameter and volume. Not only is the PWC over 100% larger than any other expanding bullet, expansion is achieved despite being shot through barriers. The solid copper body ensures that wallboard, sheet metal, and automotive glass will have no effect on the Permanent Wound Channel. All of Underwood Ammo rounds utilize flash suppressed powder so that your vision will not be compromised if it becomes necessary to use your firearm in low light.

The Underwood nickel plating process provides several key benefits including; improved feeding in all actions of firearms, enhanced corrosion resistance over traditional brass, improved cosmetics, and ease of cleanup during reloading. Nickel plated casings will not tarnish like brass during storage or when in contact with foreign materials such as leather, moisture, and other metals. Until the development of the Ducta-Bright 7a process, nickel plating casings often limited the number of reloads as compared to raw brass. It was claimed that nickel plated brass casings embrittled the brass therefore making it less desirable for reloaders despite the ease of cleanup that nickel plating offers. In addition, ammunition engineers raising concerns of using nickel plating in very hot +P or magnum loads found that traditional nickel plating often cracked deep-drawn cases, or worse, lead to a total failure. This new process eliminates any concern, to the shooter or reloader, of hazard or ability to re-use the brass.

Features

• Reduced recoil.
• CNC machined from solid copper to overcome barriers to penetration
• Radial flutes that force the hydraulic energy inward to build pressure
• Minimal surface area to increase the force at the point of contact and sharp cutting edges that defeat barriers

Atomic Defensive ammunition is loaded to exact specifications with the most popular bullets from major manufacturers to deliver the consistent and reliable performance required from a self-defense load. Each and every round is inspected before leaving the factory to ensure the upmost quality. This ammunition is accurate enough to compete and win yet priced right for regular practice. This is no “gamer’s” load.  It is soft enough recoiling to allow for fast follow up shots but has enough power that it could serve you on the trail and no old timer would call ya a sissy for packing it in your hog leg.  Try it out partner, your gunna’ love it!