-
CCI Clean-22 Suppressor Ammunition 22 Long Rifle 45 Grain Black Polymer Coated Lead Round Nose Box of 200
CCI Clean-22 Suppressor ammunition uses an advanced polymer bullet coating to reduce lead fouling inside a suppressor up to 60 percent. The exclusive feature allows much easier suppressor cleaning and maintenance, as well as excellent accuracy. With dependable CCI priming and consistent propellant, the loads cycle reliably through any suppressed firearm.
Features
- Polymer bullet coating reduces lead fouling in suppressors up to 60 percent
- Ballistically optimized 45-grain lead round nose bullet
- Reliable function in semi-automatic firearms
- Extremely reliable CCI priming
CAD $40.80 -
Browning BXD Upland Ammunition 12 Gauge
Features
- High Velocity
- Maximum downrange energy
- Focused energy deposit
A global leader in offering quality and innovative firearms, Browning now introduces a new, full-line of superior performance ammunition for hunting, personal defense and target shooting. Browning and Winchester developed this full line of ammunition products under the Browning brand. The Browning Ammunition portfolio includes popular ammunition offerings in rifle, shotgun, handgun and rimfire, featuring advanced technologies for hunters and shooters.
BXD Upland Extra Distance launches premium-plated shot at high velocities to achieve premium in-the-field performance. Nickel plated shot helps keep shot round resulting in high velocity retention and energy transfer as well as tighter downrange patterns.
CAD $40.80 -
Winchester Rooster XR Pheasant Ammunition 12 Gauge 2-3/4″ 1-1/4 oz #4 Copper Plated Shot Box of 15
Winchester Rooster XR ammunition provides thelong-range lethality upland hunters rely on when it comes to flushing ringnecks. Featuring new-to-the-world Shot-Lok Technology, Rooster XR ammunition offers tighter patterns and longer shot capability than traditional pheasant loads. Rooster XR ammunition has the knockdown power needed for long range shots that can be challenging for upland hunters looking to push the limits.
Shot-Lok Technology, found in Rooster XR, is a hardened resin that eliminates air space around the pellets preventing movement, which ultimately leads to virtually no pellet deformation. As the shot is fired, the resin fractures, forming a micro-buffer as the shot pattern leaves the gun barrel—the pellets remain round and fly straighter and tighter resulting in highly consistent payloads and devastating knockdown at longer ranges.
Features
- Shot-Lok Technology
- Deeper Penetration
- Devastating Terminal Performance
CAD $40.80 -
Winchester Rooster XR Pheasant Ammunition 12 Gauge 2-3/4″ 1-1/4 oz #5 Copper Plated Shot Box of 15
Winchester Rooster XR ammunition provides thelong-range lethality upland hunters rely on when it comes to flushing ringnecks. Featuring new-to-the-world Shot-Lok Technology, Rooster XR ammunition offers tighter patterns and longer shot capability than traditional pheasant loads. Rooster XR ammunition has the knockdown power needed for long range shots that can be challenging for upland hunters looking to push the limits.
Shot-Lok Technology, found in Rooster XR, is a hardened resin that eliminates air space around the pellets preventing movement, which ultimately leads to virtually no pellet deformation. As the shot is fired, the resin fractures, forming a micro-buffer as the shot pattern leaves the gun barrel—the pellets remain round and fly straighter and tighter resulting in highly consistent payloads and devastating knockdown at longer ranges.
Features
- Shot-Lok Technology
- Deeper Penetration
- Devastating Terminal Performance
CAD $40.80 -
Winchester Rooster XR Pheasant Ammunition 12 Gauge 2-3/4″ 1-1/4 oz #6 Copper Plated Shot Box of 15
Winchester Rooster XR ammunition provides thelong-range lethality upland hunters rely on when it comes to flushing ringnecks. Featuring new-to-the-world Shot-Lok Technology, Rooster XR ammunition offers tighter patterns and longer shot capability than traditional pheasant loads. Rooster XR ammunition has the knockdown power needed for long range shots that can be challenging for upland hunters looking to push the limits.
Shot-Lok Technology, found in Rooster XR, is a hardened resin that eliminates air space around the pellets preventing movement, which ultimately leads to virtually no pellet deformation. As the shot is fired, the resin fractures, forming a micro-buffer as the shot pattern leaves the gun barrel—the pellets remain round and fly straighter and tighter resulting in highly consistent payloads and devastating knockdown at longer ranges.
Features
- Shot-Lok Technology
- Deeper Penetration
- Devastating Terminal Performance
CAD $40.80 -
Hevi-Shot Magnum Blend Turkey Ammunition 20 Gauge 3″ 1-1/4 oz #5, #6 and #7 Hevi-Shot High Velocity Non-Toxic Box of 5
Heavy Shot Magnum Blend, non-toxic turkey loads offer deep penetration and clean kills, even at extended ranges. Hevi-13 is used exclusively at the NWTF World Still Target Championships. Loaded with buffered and moly coated pellets, Hevi-13 creates denser patterns than lead pellets which in turn increases overall performance.
Loaded with 40% more pellets, Hevi-13 Magnum Blend loads feature pellets of #5, #6 and #7 Hevi-Shot. The Pattern-Density technology packs more pellets into one shell increasing the chances of hitting the target every time.
CAD $40.80 -
Federal Premium Prairie Storm Ammunition 20 Gauge Copper Plated Shot
Federal Premium Prairie Storm FS Lead loads use the updated FLITECONTROL FLEX wad and a mixed payload of standard pellets and FLITESTOPPER lead to produce full, consistent patterns from these smaller payloads. The improved wad design can be used through both ported and standard upland chokes for even better patterning and versatility. Don’t settle for sub-par performance from your sub-gauge shotgun.
Features
- FLITECONTROL FLEX wad can be used through all upland chokes
- Payload mix of 70 percent standard copper-plated lead and 30 percent FLITESTOPPER lead produces even edge-to-edge patterns
- FLITESTOPPER pellets create bigger wound channels
CAD $40.80 -
Federal Premium Wing-Shok Ammunition 20 Gauge Buffered Copper Plated Shot
Wing-Shok is one of the highest velocity upland bird ammunitions out there. It also gives you tighter patterns and maximum penetration, the result from copper-plated lead shot. Ideal for pheasant, grouse and quail, Wing-Shok is available in a variety of gauges and loads to suit your needs.
CAD $40.80 -
Starline Brass 41 Special
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $41.00 -
Hornady Brass 17 Hornet Box of 50
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $41.00 -
Hornady Brass 22 Hornet Box of 50
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $41.00 -
Hornady Brass 222 Remington Box of 50
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $41.00 -
Hornady Brass 5.45x39mm Box of 50
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $41.00 -
Sig Sauer Brass 308 Winchester Bag of 50
Sig Sauer cases are made from American, premium brass. These casing are rigorously tested to ensure unparalleled durability and dependability, each casing undergoes rigorous in-line and postproduction quality assurance testing to ensure a flawless casing. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $41.00 -
Sig Sauer Brass 243 Winchester Bag of 50
Sig Sauer cases are made from American, premium brass. These casing are rigorously tested to ensure unparalleled durability and dependability, each casing undergoes rigorous in-line and postproduction quality assurance testing to ensure a flawless casing. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $41.00
- Home
- Handgun Ammunition
- 10mm Auto
- 25 ACP
- 30 Super Carry
- 32 ACP
- 32 H&R Magnum
- 32 S&W
- 32 S&W Long
- 327 Federal Magnum
- 357 Magnum
- 357 Sig
- 38 S&W
- 38 Special
- 38 Super
- 380 ACP
- 40 S&W
- 40 Super
- 400 Cor-Bon
- 41 Remington Magnum
- 44 Remington Magnum
- 44 Special
- 45 ACP
- 45 Auto Rim
- 45 Colt (Long Colt)
- 45 GAP
- 45 Super
- 45 Winchester Magnum
- 454 Casull
- 460 Rowland
- 460 S&W Magnum
- 5.7x28mm FN
- 50 Action Express
- 500 JRH
- 500 S&W Magnum
- 7.62x25mm Tokarev
- 9mm Luger
- 9mm Makarov
- 9x25mm Dillon
- Primers
- Reloading Brass
- Smokeless Powder
- Rifle Ammunition
- 17 Remington
- 204 Ruger
- 22 Hornet
- 22 Nosler
- 22-250 Remington
- 220 Swift
- 221 Fireball
- 222 Remington
- 223 Remington
- 223 Winchester Super Short Magnum
- 224 Valkyrie
- 243 Winchester
- 25-06 Remington
- 257 Roberts
- 257 Weatherby Magnum
- 260 Remington
- 264 Winchester Magnum
- 270 Weatherby Magnum
- 270 Winchester
- 270 Winchester Short Magnum
- 28 Nosler
- 280 Remington
- 280 Remington Ackley Improved 40-Degree Shoulder
- 30 Carbine
- 30 Nosler
- 30-06 Springfield
- 30-30 Winchester
- 30-378 Weatherby Magnum
- 30-40 Krag
- 300 AAC Blackout (7.62x35mm)
- 300 H&H Magnum
- 300 PRC
- 300 Remington Short Action Ultra Magnum
- 300 Remington Ultra Magnum
- 300 Savage
- 300 Weatherby Magnum
- 300 Winchester Magnum
- 300 Winchester Short Magnum
- 303 British
- 308 Winchester
- 32 Winchester Special
- 32-20 WCF
- 325 Winchester Short Magnum (WSM)
- 33 Nosler
- 338 Federal
- 338 Lapua Magnum
- 338 Remington Ultra Magnum
- 338 Winchester Magnum
- 338-06 A-Square
- 340 Weatherby Magnum
- 35 Remington
- 35 Whelen
- 350 Legend
- 358 Winchester
- 375 H&H Magnum
- 375 Ruger
- 375 SOCOM
- 38-55 WCF
- 4.6x30mm HK
- 404 Jeffery
- 416 Remington Magnum
- 416 Rigby
- 44-40 WCF
- 444 Marlin
- 45 Raptor
- 45-70 Government
- 450 Bushmaster
- 458 HAMR
- 458 Lott
- 458 SOCOM
- 458 Winchester Magnum
- 460 Weatherby Magnum
- 470 Nitro Express
- 5.56x45mm NATO
- 50 Beowulf
- 500 Auto Max
- 500 Nitro Express 3″
- 6.5 Creedmoor
- 6.5 Grendel
- 6.5 PRC
- 6.5-300 Weatherby Magnum
- 6.5mm-284 Norma
- 6.5x47mm Lapua
- 6.5x55mm Swedish Mauser
- 6.8 Western
- 6.8mm Remington SPC
- 6mm Advanced Rifle Cartridge (6mm ARC)
- 6mm Creedmoor
- 6mm Remington
- 7.62x39mm
- 7.62x51mm NATO
- 7.62x54mm Rimmed Russian
- 7mm Remington Magnum
- 7mm Remington Short Action Ultra Magnum
- 7mm Remington Ultra Magnum
- 7mm STW
- 7mm Weatherby Magnum
- 7mm-08 Remington
- 7x57mm Mauser (7mm Mauser)
- 7x64mm Brenneke
- 8mm Remington Magnum
- 8x57mm JS Mauser (8mm Mauser) (323 Dia)
- 9.3x62mm Mauser
- 9.3x74mm Rimmed
- Rimfire Ammunition
- Shotgun Ammunition