-
Starline Brass 327 Federal Magnum
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $44.00 -
Lapua Brass 32 S&W Long Box of 100 (Bulk Packaged)
Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua’s exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $44.00 -
Barnes VOR-TX Ammunition 22-250 Remington 50 Grain TSX Hollow Point Lead-Free Box of 20
Barnes bullets have historically had the reputation of offering quick, clean and humane kills. Now they are taking their highly regarded bullets to the next level loading them in ammunition.
Loaded with the Barnes Triple-Shock X (TSX) Bullet, this round offers devastating results on varmints. The Barnes TSX bullet is made of 100% copper and contains no lead. When the bullet expands, four razor-sharp cutting petals are created, allowing the bullet to penetrate farther through tough bone and tissue. These bullets usually retain 100% of their original weight. The Triple-Shock X bullet delivers the “three strikes you’re out” rule. Once as it strikes game, two as the bullet begins to open and a third impact when the cavity fully expands to deliver extra shock with maximum transferred energy. Ideal for varmints as well as deer-sized game.
VOR-TX ammunition is manufactured to precise tolerances to ensure excellent accuracy and consistent velocities. This ammunition is new production, non-corrosive, in boxer-primed, reloadable brass cases.
CAD $44.00 -
Norma TipStrike Varmint Ammunition 22-250 Remington 54 Grain Polymer Tip Box of 20
Norma TIPSTRIKE is developed for stopping power, combined with a penetration deep enough to reach the vital organs of the game. The polymer tip assures the expansion and gives a devastating shock effect due to the construction of the bullet jacket. To maintain a high retention weight, the jacket is reinforced with a mechanical lock, thus making TIPSTRIKE an outstanding bullet for driven hunts and other forms of hunting where an immediate stop is crucial. This ammunition is new production, non-corrosive, in boxer-primed, reloadable brass cases.
Features
- Polymer tip for improved ballistics.
- The insertion of the tip gives a slight delay of the expansion to enhance penetration.
- Devastating chock effect through a tapered and quick opened front part of the jacket.
- Penetration secured through a strong and straight rear part of the jacket combined with a internal mechanical lead lock.
CAD $44.00 -
Barnes VOR-TX Ammunition 30-30 Winchester 150 Grain TSX Hollow Point Lead-Free Box of 20
Barnes bullets have historically had the reputation of offering quick, clean and humane kills. Now they are taking their highly regarded bullets to the next level loading them in ammunition.
Loaded with the Barnes Triple-Shock X (TSX) Bullet, this round offers devastating results on varmints. The Barnes TSX bullet is made of 100% copper and contains no lead. When the bullet expands, four razor-sharp cutting petals are created, allowing the bullet to penetrate farther through tough bone and tissue. These bullets usually retain 100% of their original weight. The Triple-Shock X bullet delivers the “three strikes you’re out” rule. Once as it strikes game, two as the bullet begins to open and a third impact when the cavity fully expands to deliver extra shock with maximum transferred energy. Ideal for deer-sized game.
The flat nose hollow point bullet design is tube magazine friendly for use in lever action rifles.
VOR-TX ammunition is manufactured to precise tolerances to ensure excellent accuracy and consistent velocities. This ammunition is new production, non-corrosive, in boxer-primed, reloadable brass cases.
CAD $44.00 -
Federal Fusion Ammunition 7mm-08 Remington 120 Grain Bonded Spitzer Boat Tail Box of 20
Federal Fusion Ammunition is loaded with a specialized bullet, perfect for deer sized game, that features an electrochemically bonded lead core to copper jacket, eliminating the possibility of a core/jacket separation. The boat tail rifle bullets feature a slight dimple in the nose that delivers exceptional accuracy and devastating terminal performance which delivers an impact that radiates lethal shock throughout the target. This energy is optimized through mass weight retention, a top-secret tip-skiving process and superior bullet integrity. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
CAD $44.00 -
Federal Fusion Ammunition 7mm-08 Remington 140 Grain Bonded Spitzer Boat Tail Box of 20
Federal Fusion Ammunition is loaded with a specialized bullet, perfect for deer sized game, that features an electrochemically bonded lead core to copper jacket, eliminating the possibility of a core/jacket separation. The boat tail rifle bullets feature a slight dimple in the nose that delivers exceptional accuracy and devastating terminal performance which delivers an impact that radiates lethal shock throughout the target. This energy is optimized through mass weight retention, a top-secret tip-skiving process and superior bullet integrity. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
CAD $44.00 -
Underwood Ammunition 458 SOCOM 300 Grain Jacketed Hollow Point Box of 20
While taking advantage of state of the art testing equipment, this high performance ammunition by Underwood is field tested using popular, real firearms that customers are most likely to own out in the real world with all the elements you would experience. If for some reason Underwood Ammunition fails to meet performance expectations, Underwood stands by their product 100% and will make sure the customer is satisfied with every purchase. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. The XTP bullet is really known for its stopping power. They were designed from the beginning to expand reliably at a variety of handgun velocities and deliver deep, terminal penetration with every shot. Most handgun bullets are designed to perform at a single factory-specified velocity where the XTP bullet is designed to offer controlled expansion over a range of velocities. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. All of Underwood Ammo rounds utilize flash suppressed powder so that your vision will not be compromised if it becomes necessary to use your firearm in low light.
CAD $44.00 -
Hornady Precision Hunter Ammunition 6mm Creedmoor 103 Grain ELD-X Box of 20
Loaded with the most advanced all-range hunting bullet available, Precision Hunter Ammunition sets a new standard of accurate, deadly and dependable hunting performance. Your trophy has never been closer– even if it’s far away! Featuring the radically superior ELD-X bullet with patented Heat Shield tip, Precision Hunter will soon be the “go-to” load for ANY hunting situation because of its effective terminal performance at ALL practical ranges.
The Heat Shield tip of the Hornady ELD-X bullet defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. A streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions. With high velocity, 0-400 yard impact, the bullet continually expands throughout its penetration path. The thick shank of the jacket and high Interlock ring keep the core and jacket together providing 50-60% weight retention. Upon low velocity, 400+ yard impacts, the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Features
- Heat Shield Tip forms the perfect meplat
- No tip deformation from aerodynamic heating
- Match accurate hunting bullet
- Devastating terminal performance at all ranges
CAD $44.00 -
Nosler Varmageddon Ammunition 6mm Creedmoor 70 Grain Polymer Tip Flat Base Box of 20
Nosler Varmageddon ammunition is specifically designed to be the end of the world for any varmint in its path. Available with either a hollow point or polymer tip, this flat based bullet design delivers high velocities and extreme terminal performance on varmints at long ranges. Available in several different calibers and loads, Varmageddon ammunition is sure to meet all your varmint hunting needs. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Over the years, Nosler has built its reputation through the production of quality, consistent, and reliable products for hunters and shooters alike. Built upon bullets such as the ever popular Partition and the Solid Base, Nosler has continuously proven its ability to produce technologically advanced, deadly bullets and ammunition.
Features
- Cases checked for correct length
- Necks sized, chamfered and trued
- Flash holes checked for proper alignment
- Powder charges are meticulously weighed
- Finished rounds are visually inspected and polished
- High-performance powder and bullet combinations
CAD $44.00 -
Nosler E-Tip Ammunition 25-06 Remington 100 Grain E-Tip Lead-Free Box of 20
Nosler E-Tip ammunition is high quality, production-run ammunition manufactured to strict tolerances and inspected as it is hand-packaged. Nosler Ammunition features Nosler Custom brass and the dependable, high performing bullets you know and trust.
Nosler’s E-Tip lead-free bullet features the same polycarbonate tip found on the popular AccuBond and Ballistic Tip bullets that prevents deformation in the magazine, boosts aerodynamic efficiency, and initiates expansion. A precisely formed boat-tail reduces drag delivering more down range energy. Specially designed Energy Expansion Cavity allows for immediate and uniform expansion while retaining 95%+ weight for improved penetration. Patent pending alloy reduces fouling while providing superior accuracy and consistent performance.
Features
- OD Green polymer tip initiates expansion immediately upon impact
- One-piece construction for high weight retention and deep penetration
- Certified for use in lead free areas
CAD $44.00 -
Shooters World 50 BMG D100-01 Smokeless Gun Powder
Product Overview
Shooters World 50 BMG D100-01 Smokeless Gun Powder is a medium-slow burning, high density, double base, ball propellant most suitable for .50 Browning cartridge. In addition to nitrocellulose double base powders contain also nitroglycerin (8 – 23 %) as an energetic component. These powders contain also a small percentage of stabilizers or other additives as the single base powders. Double base powders are of higher energetic value than single base powders and their ballistic performance is better.
Another advantage to Shooters World propellants is the long track record of these propellants. The Shooter’s World manufacturer has been making propellants since 1920. Many of these propellants are sold throughout Europe under the Lovex brand.
Price range: CAD $44.19 through CAD $342.71
Shooters World 50 BMG D100-01 Smokeless Gun Powder
Price range: CAD $44.19 through CAD $342.71 Select options This product has multiple variants. The options may be chosen on the product page -
Remington Brass 6mm Creedmoor Bag of 50
Remington cartridge cases are carefully drawn from specially-alloyed brass to provide consistently exact internal volume and resistance to case stretching and brittleness. Primer pocket tolerances are held to .001″, and closely monitored case neck annealing ensures easier re-sizing and longer reloading life. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $44.55 -
Remington Brass 308 Winchester Bag of 50
Remington cartridge cases are carefully drawn from specially-alloyed brass to provide consistently exact internal volume and resistance to case stretching and brittleness. Primer pocket tolerances are held to .001″, and closely monitored case neck annealing ensures easier re-sizing and longer reloading life. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $44.55 -
Winchester Brass 32 Winchester Special Bag of 50
Winchester Reloading Brass is manufactured to extremely tight tolerances to ensure smooth feeding and positive chambering. Consistent case-to-case weight and capacity delivers outstanding accuracy. Winchester’s high quality, durable brass can be reloaded several times. New, unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $44.55
- Home
- Handgun Ammunition
- 10mm Auto
- 25 ACP
- 30 Super Carry
- 32 ACP
- 32 H&R Magnum
- 32 S&W
- 32 S&W Long
- 327 Federal Magnum
- 357 Magnum
- 357 Sig
- 38 S&W
- 38 Special
- 38 Super
- 380 ACP
- 40 S&W
- 40 Super
- 400 Cor-Bon
- 41 Remington Magnum
- 44 Remington Magnum
- 44 Special
- 45 ACP
- 45 Auto Rim
- 45 Colt (Long Colt)
- 45 GAP
- 45 Super
- 45 Winchester Magnum
- 454 Casull
- 460 Rowland
- 460 S&W Magnum
- 5.7x28mm FN
- 50 Action Express
- 500 JRH
- 500 S&W Magnum
- 7.62x25mm Tokarev
- 9mm Luger
- 9mm Makarov
- 9x25mm Dillon
- Primers
- Reloading Brass
- Smokeless Powder
- Rifle Ammunition
- 17 Remington
- 204 Ruger
- 22 Hornet
- 22 Nosler
- 22-250 Remington
- 220 Swift
- 221 Fireball
- 222 Remington
- 223 Remington
- 223 Winchester Super Short Magnum
- 224 Valkyrie
- 243 Winchester
- 25-06 Remington
- 257 Roberts
- 257 Weatherby Magnum
- 260 Remington
- 264 Winchester Magnum
- 270 Weatherby Magnum
- 270 Winchester
- 270 Winchester Short Magnum
- 28 Nosler
- 280 Remington
- 280 Remington Ackley Improved 40-Degree Shoulder
- 30 Carbine
- 30 Nosler
- 30-06 Springfield
- 30-30 Winchester
- 30-378 Weatherby Magnum
- 30-40 Krag
- 300 AAC Blackout (7.62x35mm)
- 300 H&H Magnum
- 300 PRC
- 300 Remington Short Action Ultra Magnum
- 300 Remington Ultra Magnum
- 300 Savage
- 300 Weatherby Magnum
- 300 Winchester Magnum
- 300 Winchester Short Magnum
- 303 British
- 308 Winchester
- 32 Winchester Special
- 32-20 WCF
- 325 Winchester Short Magnum (WSM)
- 33 Nosler
- 338 Federal
- 338 Lapua Magnum
- 338 Remington Ultra Magnum
- 338 Winchester Magnum
- 338-06 A-Square
- 340 Weatherby Magnum
- 35 Remington
- 35 Whelen
- 350 Legend
- 358 Winchester
- 375 H&H Magnum
- 375 Ruger
- 375 SOCOM
- 38-55 WCF
- 4.6x30mm HK
- 404 Jeffery
- 416 Remington Magnum
- 416 Rigby
- 44-40 WCF
- 444 Marlin
- 45 Raptor
- 45-70 Government
- 450 Bushmaster
- 458 HAMR
- 458 Lott
- 458 SOCOM
- 458 Winchester Magnum
- 460 Weatherby Magnum
- 470 Nitro Express
- 5.56x45mm NATO
- 50 Beowulf
- 500 Auto Max
- 500 Nitro Express 3″
- 6.5 Creedmoor
- 6.5 Grendel
- 6.5 PRC
- 6.5-300 Weatherby Magnum
- 6.5mm-284 Norma
- 6.5x47mm Lapua
- 6.5x55mm Swedish Mauser
- 6.8 Western
- 6.8mm Remington SPC
- 6mm Advanced Rifle Cartridge (6mm ARC)
- 6mm Creedmoor
- 6mm Remington
- 7.62x39mm
- 7.62x51mm NATO
- 7.62x54mm Rimmed Russian
- 7mm Remington Magnum
- 7mm Remington Short Action Ultra Magnum
- 7mm Remington Ultra Magnum
- 7mm STW
- 7mm Weatherby Magnum
- 7mm-08 Remington
- 7x57mm Mauser (7mm Mauser)
- 7x64mm Brenneke
- 8mm Remington Magnum
- 8x57mm JS Mauser (8mm Mauser) (323 Dia)
- 9.3x62mm Mauser
- 9.3x74mm Rimmed
- Rimfire Ammunition
- Shotgun Ammunition