-
Remington Brass 9mm Luger Bag of 100
Remington cartridge cases are carefully drawn from specially-alloyed brass to provide consistently exact internal volume and resistance to case stretching and brittleness. Primer pocket tolerances are held to .001″, and closely monitored case neck annealing ensures easier re-sizing and longer reloading life. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $48.60 -
Remington Brass 300 AAC Blackout Bag of 50
Remington cartridge cases are carefully drawn from specially-alloyed brass to provide consistently exact internal volume and resistance to case stretching and brittleness. Primer pocket tolerances are held to .001″, and closely monitored case neck annealing ensures easier re-sizing and longer reloading life. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $48.60 -
Winchester Brass 30-40 Krag Box of 50
Winchester makes the highest quality brass available, and each and every piece is made to meet and exceed the most demanding quality control and performance standards in the industry. New, unprimed brass. This is not loaded ammunition.
Preparation:
- Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfered prior to loading.
Note:
- A light “staining” may be found on the case neck of new brass. This is due to annealing. Annealing is a process, performed by the manufacturer, which involves rapid heating to a specified temperature followed by rapid cooling. This process imparts cases with the proper hardness to securely hold a bullet as well as gives flexibility to expand and contract upon firing and repeated forming. The “staining” is a residue from this process. This stain may be removed by tumbling before loading. Brass should be full-length sized, trimmed and chamfered before loading.
CAD $48.60 - Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfered prior to loading.
-
Federal Premium Gold Medal Brass 9mm Luger Bag of 100
Federal is known for loading some of the best factory ammunition available and this brass is no different. This brass is manufactured to the same high standards and consistency that have made Federal Premium Ammunition one of the favorites of shooters everywhere. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $48.60 -
Federal Premium Gold Medal Brass 30-06 Springfield Bag of 50
Federal is known for loading some of the best factory ammunition available and this brass is no different. This brass is manufactured to the same high standards and consistency that have made Federal Premium Ammunition one of the favorites of shooters everywhere. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $48.60 -
Alliant Bullseye Smokeless Gun Powder
Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.
Bullseye, a smokeless pistol powder, was originally introduced to shooters in 1913. It’s fast burning, consistent, economical and ideal for loading 45 ACP target loads.
Warnings from the Manufacturer:
- Do not exceed the loads displayed in the reloaders guide.
- Never mix any two powders regardless of type, brand, or source.
- Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
Price range: CAD $48.95 through CAD $344.07
Alliant Bullseye Smokeless Gun Powder
Price range: CAD $48.95 through CAD $344.07 Select options This product has multiple variants. The options may be chosen on the product page -
Alliant 410 Smokeless Gun Powder
Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.
Alliant Powder’s 410 is a flake powder specifically designed for the exacting needs of .410 skeet and field loads. Being the cleanest burning .410 powder available, 410 is more efficient, with lower powder charge weights, providing optimum loading characteristics. The superior ballistic performance of 410 creates perfect patterns. Consistent performance in any weather, shot after shot, lot after lot, makes 410 your reloading powder of choice.
Warnings from the Manufacturer:
- Do not exceed the loads displayed in the reloaders guide.
- Never mix any two powders regardless of type, brand, or source.
- Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
Price range: CAD $48.95 through CAD $350.87
Alliant 410 Smokeless Gun Powder
Price range: CAD $48.95 through CAD $350.87 Select options This product has multiple variants. The options may be chosen on the product page -
Alliant Power Pistol Smokeless Gun Powder
Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.
Power Pistol smokeless powder is double based, fast burning, consistent, economical and extremely accurate, making this powder an excellent choice for high performance semi-automatic pistols like the 9mm Luger, 40 S&W and 10mm Auto.
Warnings from the Manufacturer:- Do not exceed the loads displayed in the reloaders guide.
- Never mix any two powders regardless of type, brand, or source.
- Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
Price range: CAD $48.95 through CAD $348.15
Alliant Power Pistol Smokeless Gun Powder
Price range: CAD $48.95 through CAD $348.15 Select options This product has multiple variants. The options may be chosen on the product page -
Alliant 20/28 Smokeless Gun Powder
Every container of Alliant Smokeless Powder is backed by a century of manufacturing experience and the most exacting quality control procedures in the industry. Chemical composition, grain shape and size, and overall density are constantly checked and tested in a ballistics lab to ensure consistency.
The 20/28 smokeless powder is extremely clean burning and provides consistency with every shot, something required in skeet and sporting clay shooting. Designed specifically for 20 and 28 gauge target and skeet loads. Can be used in all modern 20 and 28 gauge firearms.
Warnings from the Manufacturer:
- Do not exceed the loads displayed in the reloaders guide.
- Never mix any two powders regardless of type, brand, or source.
- Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
Price range: CAD $48.95 through CAD $348.15
Alliant 20/28 Smokeless Gun Powder
Price range: CAD $48.95 through CAD $348.15 Select options This product has multiple variants. The options may be chosen on the product page -
Hodgdon International®
Product Overview
Price range: CAD $48.95 through CAD $399.83
Hodgdon International®
Price range: CAD $48.95 through CAD $399.83 Select options This product has multiple variants. The options may be chosen on the product page -
Accurate 2200®
Product Overview
Price range: CAD $48.95 through CAD $345.43
Accurate 2200®
Price range: CAD $48.95 through CAD $345.43 Select options This product has multiple variants. The options may be chosen on the product page -
Ramshot Silhouette
Product Overview
Price range: CAD $48.95 through CAD $168.63
Ramshot Silhouette
Price range: CAD $48.95 through CAD $168.63 Select options This product has multiple variants. The options may be chosen on the product page -
Norma Home Defense Safeguard Ammunition 9mm Luger 115 Grain Jacketed Hollow Point Box of 50
Consistency and reliability are paramount in self-defense ammunition—and Norma’s Home Defense Safeguard Ammunition line delivers. These offerings cover standard personal defense calibers and are great for Revolvers or semi-automatics. The Jacketed Hollow Point loads from Norma marry reliable expansion, penetration, and affordability with unbelievable quality control and consistency. The result is a complete lineup that is confident and ready to deliver if needed. This ammunition is new production, non-corrosive, in boxer-primed, reloadable brass cases.
Features
- Reliable expansion and penetration for energy transfer on target
- Reliable feed and function for revolvers or semi-automatics
- Excellent quality control and consistency
CAD $48.96 -
Nosler Match Grade Ammunition 9mm Luger 124 Grain Jacketed Hollow Point
Nosler Match Grade Ammunition is loaded using Nosler Custom Brass and meticulously weighed powder along with trusted Nosler Bullets. The brass goes through intense quality checks and is inspected for correct length, neck-sized, chamfered, trued, and the flash holes are checked for proper alignment. The resulting ammunition delivers extreme accuracy and consistency unlike many other factory loads.
CAD $48.96 -
Remington Golden Saber Bonded Ammunition 9mm Luger 147 Grain Jacketed Hollow Point Box of 20
Remington Golden Saber Bonded, the ultimate in handgun ammunition, designed for law enforcement, is now available to the public. All the revolutionary features that make Golden Saber rounds the leading edge in tactical handgun rounds, along with the unmatched barrier-penetration performance of Remington’s special bonded-bullet design. Through an exclusive Remington process, the lead core is hot-bonded to the brass jacket. Exceptional weight retention – up to 97% through auto glass. Reduced bullet nose diameter for precise bore alignment and match-grade accuracy. Requires less energy to initiate expansion. Jacket stiffness and wall thickness optimized to eliminate over-expansion, thus maximizing penetration. This ammunition is new production, non-corrosive, in reloadable nickel-plated brass cases.
Features
•Lead core hot-bonded to brass jacket
•Exceptional weight retention
•Nickel-plated cases for more reliable feeding
•Waterproofed primers and case mouths provide max integrity in all weather conditions
•Flash-suppressed powders
•Industry-exclusive Driving BandCAD $48.96
- Home
- Handgun Ammunition
- 10mm Auto
- 25 ACP
- 30 Super Carry
- 32 ACP
- 32 H&R Magnum
- 32 S&W
- 32 S&W Long
- 327 Federal Magnum
- 357 Magnum
- 357 Sig
- 38 S&W
- 38 Special
- 38 Super
- 380 ACP
- 40 S&W
- 40 Super
- 400 Cor-Bon
- 41 Remington Magnum
- 44 Remington Magnum
- 44 Special
- 45 ACP
- 45 Auto Rim
- 45 Colt (Long Colt)
- 45 GAP
- 45 Super
- 45 Winchester Magnum
- 454 Casull
- 460 Rowland
- 460 S&W Magnum
- 5.7x28mm FN
- 50 Action Express
- 500 JRH
- 500 S&W Magnum
- 7.62x25mm Tokarev
- 9mm Luger
- 9mm Makarov
- 9x25mm Dillon
- Primers
- Reloading Brass
- Smokeless Powder
- Rifle Ammunition
- 17 Remington
- 204 Ruger
- 22 Hornet
- 22 Nosler
- 22-250 Remington
- 220 Swift
- 221 Fireball
- 222 Remington
- 223 Remington
- 223 Winchester Super Short Magnum
- 224 Valkyrie
- 243 Winchester
- 25-06 Remington
- 257 Roberts
- 257 Weatherby Magnum
- 260 Remington
- 264 Winchester Magnum
- 270 Weatherby Magnum
- 270 Winchester
- 270 Winchester Short Magnum
- 28 Nosler
- 280 Remington
- 280 Remington Ackley Improved 40-Degree Shoulder
- 30 Carbine
- 30 Nosler
- 30-06 Springfield
- 30-30 Winchester
- 30-378 Weatherby Magnum
- 30-40 Krag
- 300 AAC Blackout (7.62x35mm)
- 300 H&H Magnum
- 300 PRC
- 300 Remington Short Action Ultra Magnum
- 300 Remington Ultra Magnum
- 300 Savage
- 300 Weatherby Magnum
- 300 Winchester Magnum
- 300 Winchester Short Magnum
- 303 British
- 308 Winchester
- 32 Winchester Special
- 32-20 WCF
- 325 Winchester Short Magnum (WSM)
- 33 Nosler
- 338 Federal
- 338 Lapua Magnum
- 338 Remington Ultra Magnum
- 338 Winchester Magnum
- 338-06 A-Square
- 340 Weatherby Magnum
- 35 Remington
- 35 Whelen
- 350 Legend
- 358 Winchester
- 375 H&H Magnum
- 375 Ruger
- 375 SOCOM
- 38-55 WCF
- 4.6x30mm HK
- 404 Jeffery
- 416 Remington Magnum
- 416 Rigby
- 44-40 WCF
- 444 Marlin
- 45 Raptor
- 45-70 Government
- 450 Bushmaster
- 458 HAMR
- 458 Lott
- 458 SOCOM
- 458 Winchester Magnum
- 460 Weatherby Magnum
- 470 Nitro Express
- 5.56x45mm NATO
- 50 Beowulf
- 500 Auto Max
- 500 Nitro Express 3″
- 6.5 Creedmoor
- 6.5 Grendel
- 6.5 PRC
- 6.5-300 Weatherby Magnum
- 6.5mm-284 Norma
- 6.5x47mm Lapua
- 6.5x55mm Swedish Mauser
- 6.8 Western
- 6.8mm Remington SPC
- 6mm Advanced Rifle Cartridge (6mm ARC)
- 6mm Creedmoor
- 6mm Remington
- 7.62x39mm
- 7.62x51mm NATO
- 7.62x54mm Rimmed Russian
- 7mm Remington Magnum
- 7mm Remington Short Action Ultra Magnum
- 7mm Remington Ultra Magnum
- 7mm STW
- 7mm Weatherby Magnum
- 7mm-08 Remington
- 7x57mm Mauser (7mm Mauser)
- 7x64mm Brenneke
- 8mm Remington Magnum
- 8x57mm JS Mauser (8mm Mauser) (323 Dia)
- 9.3x62mm Mauser
- 9.3x74mm Rimmed
- Rimfire Ammunition
- Shotgun Ammunition