• Nosler Brass 223 Remington Bag of 250

    Nosler Brass 223 Remington Bag of 250

    Nosler Brass is manufactured with the traditional Nosler philosophy of uncompromising attention to detail. Nosler cartridge brass is created to exact dimensional standards and tolerances, using quality materials for maximum accuracy and consistency potential while extending case life.  Nosler brass also undergoes the rigorous quality control that premium Nosler bullets have experienced for over 60 years. Same quality you’ve come to expect from Nosler Custom brass, but may need some prep work before loading. This brass is new and unprimed. This is not loaded ammunition.

    CAD $229.84
    Add to cart

    Nosler Brass 223 Remington Bag of 250

    CAD $229.84 Add to cart
  • Nosler Custom Brass 30-378 Weatherby Magnum Box of 25

    Nosler Custom Brass 30-378 Weatherby Magnum Box of 25

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $224.40
    Add to cart

    Nosler Custom Brass 30-378 Weatherby Magnum Box of 25

    CAD $224.40 Add to cart
  • Starline Brass 50-90 Sharps

    Starline Brass 50-90 Sharps

    Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.

    Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them.  Nickel plating is harder than brass and the cases require more effort in sizing.  In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.

    CAD $221.68
    Add to cart

    Starline Brass 50-90 Sharps

    CAD $221.68 Add to cart
  • IMR Target™

    IMR Target™

    This product has been discontinued.

    IMR Target is one of a new IMR family of powders that have comparable burn speeds to competitor powders. This new IMR family uses new, modern technology to ensure the product is “green,” burns clean and, in most cases, results in more energy from each grain of powder. IMR powders are consistent in bulk densities from lot to lot, eliminating some of the variability inherent in other competitors.

    IMR Target is a fast-burning pistol powder yielding outstanding performance in 25 ACP, 38 Special and 45 ACP. It’s perfect for cowboy action target loads, where reduced recoil loads are needed.

    For shotshell usage, powder densities are similar to competitor data. Most shotshell data is similar, but IMR recommends always consulting www.IMRReloading.com for the correct, up-to-date data and bushing charts. For pistol usage, pistol data is materially different from competitor data with lower charge weights and higher velocities at maximum pressures. IMR recommends always consulting www.IMRReloading.com for the correct, up-to-date data.

    Price range: CAD $38.07 through CAD $221.67
    Select options This product has multiple variants. The options may be chosen on the product page

    IMR Target™

    Price range: CAD $38.07 through CAD $221.67 Select options This product has multiple variants. The options may be chosen on the product page
  • Redding 3 Powder Measure with Universal Metering Chamber

    Redding 3 Powder Measure with Universal Metering Chamber

    Product Overview

    The Redding Model 3 Powder Measure is a great powder measure for any reloader. The micrometer metering chamber is easy to read and located very conveniently in the front of the measure for easy adjustments. The micrometer feature allows reloaders to record their favorite settings for quick reference and set-up when switching between loads. The cast iron from, hand honed fit between the frame and surface drum allows easy metering and cutting of even the most stubborn powders. The included bench-front mounting bracket and see-thru drop tube give the reloader a way to mount the measure to their bench and allow them to see that all of the powder has been dispensed.

    Features:

    • Hand honed fit between frame and surface drum, large capacity powder reservoir
    • Body has standard 7/8″-14 thread to fit mounting bracket and optional bench stand with locking ring for fast dumping

    Includes: 22-50 caliber see-thru drop tube

    CAD $214.64
    Add to cart

    Redding 3 Powder Measure with Universal Metering Chamber

    CAD $214.64 Add to cart
  • Nosler Custom Brass 270 Weatherby Magnum Box of 50

    Nosler Custom Brass 270 Weatherby Magnum Box of 50

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $213.52
    Add to cart

    Nosler Custom Brass 270 Weatherby Magnum Box of 50

    CAD $213.52 Add to cart
  • Hornady Lock-N-Load 50 BMG Powder Measure

    Hornady Lock-N-Load 50 BMG Powder Measure

    The Hornady Lock-N-Load 50 BMG Powder Measure is the ultimate powder measure for the 50 BMG reloader. The measure is specifically designed for throwing huge powder charges that the 50 BMG and other large magnums require. The oversized hopper holds enough powder to charge many cases, while the see-through drop tube allows you to visually confirmation that the complete powder charge dropped into the case.

    Notes: Designed to throw the extremely large charges necessary for the 50 BMG cartridge.

    CAD $213.29
    Add to cart

    Hornady Lock-N-Load 50 BMG Powder Measure

    CAD $213.29 Add to cart
  • Norma Brass Shooters Pack 460 Weatherby Magnum Box of 50

    Norma Brass Shooters Pack 460 Weatherby Magnum Box of 50

    Norma Shooter’s Pack brass is packaged by Norma in convenient quantities. Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition.

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $212.00
    Add to cart

    Norma Brass Shooters Pack 460 Weatherby Magnum Box of 50

    CAD $212.00 Add to cart
  • Norma Brass Shooters Pack 375 Weatherby Magnum Box of 50

    Norma Brass Shooters Pack 375 Weatherby Magnum Box of 50

    Norma Shooter’s Pack brass is packaged by Norma in convenient quantities. Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition.

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $212.00
    Add to cart

    Norma Brass Shooters Pack 375 Weatherby Magnum Box of 50

    CAD $212.00 Add to cart
  • Norma Brass Shooters Pack 378 Weatherby Magnum Box of 50

    Norma Brass Shooters Pack 378 Weatherby Magnum Box of 50

    Norma Shooter’s Pack brass is packaged by Norma in convenient quantities. Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition.

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $212.00
    Add to cart

    Norma Brass Shooters Pack 378 Weatherby Magnum Box of 50

    CAD $212.00 Add to cart
  • Nosler Custom Brass 17 Remington Box of 100

    Nosler Custom Brass 17 Remington Box of 100

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $209.44
    Add to cart

    Nosler Custom Brass 17 Remington Box of 100

    CAD $209.44 Add to cart
  • Nosler Custom Brass 338 Winchester Magnum Box of 50

    Nosler Custom Brass 338 Winchester Magnum Box of 50

    Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition.

    CAD $209.44
    Add to cart

    Nosler Custom Brass 338 Winchester Magnum Box of 50

    CAD $209.44 Add to cart
  • Lapua Brass 300 Winchester Magnum Box of 100

    Lapua Brass 300 Winchester Magnum Box of 100

    Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua’s exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. This is not loaded ammunition.

     

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $209.00
    Add to cart

    Lapua Brass 300 Winchester Magnum Box of 100

    CAD $209.00 Add to cart
  • Lapua Brass 300 PRC Box of 100

    Lapua Brass 300 PRC Box of 100

    Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua’s exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. This is not loaded ammunition.

     

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $209.00
    Add to cart

    Lapua Brass 300 PRC Box of 100

    CAD $209.00 Add to cart
  • Norma Brass Shooters Pack 300 Norma Magnum Box of 50

    Norma Brass Shooters Pack 300 Norma Magnum Box of 50

    Norma Shooter’s Pack brass is packaged by Norma in convenient quantities. Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition.

    Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

    With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

    CAD $206.72
    Add to cart

    Norma Brass Shooters Pack 300 Norma Magnum Box of 50

    CAD $206.72 Add to cart

Main Menu