IMPORTANT INFORMATION ABOUT THE HEADSTAMP ON THIS BRASS: Due to limited supplies of brass, Buffalo Bore has begun loading +P and +P+ ammunition in brass that may not be indicated as such on the headstamp. Example: 9mm Luger +P+ ammunition may be designated as 9mm Luger +P or simply 9mm Luger on the headstamp.

Buffalo Bore Heavy ammunition is loaded to be some of the most powerful and highest quality ammunition available in . Buffalo Bore Premium Heavy ammunitions is considered safe to use in any newer 32 H&R or 327 Federal chambered firearm that is in normal operating condition. DO NOT use in older 32 H&R revolvers. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

Owner of Buffalo Bore Tim Sundles on Buffalo Bore Heavy 32 H&R +P Ammunition:

This 32 H&R +P load is designed for those who need a very deep penetrating hard cast heavy load. This load should penetrate about three feet into flesh and bone. The bullet is 21-22 BHN and is properly lubed and will not substantially lead foul barrels.

We are using a flash retarded powder so that the shooter will not be blinded by his/her own gunfire in low light situations.

See our below velocities fired from real world, over-the-counter revolvers. We do not use long laboratory barrels to establish our published velocities as this will produce unrealistically fast velocities and will not tell the customer what his/her gun is producing in the real world where it matters.

• 1.1164 fps – USFA Sparrow Hawk 7.5 inch
• 2.1139 fps – Ruger Black Hawk 5.5 inch
• 3.1133 fps – Ruger SP101 3 inch