-
Nosler Match Grade Ammunition 6mm Creedmoor 115 Grain RDF Hollow Point Boat Tail Box of 20
Nosler Match Grade Ammunition is loaded using Nosler Custom Brass and meticulously weighed powder along with trusted Nosler Bullets. The brass goes through intense quality checks and is inspected for correct length, neck-sized, chamfered, trued, and the flash holes are checked for proper alignment. The resulting ammunition delivers extreme accuracy and consistency unlike many other factory loads. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
For those wanting to squeeze the most performance from their competition rifle, Nosler’s RDF (Reduced Drag Factor) match bullet line is the ideal choice. Nosler’s RDF line was designed from the ground up to provide exceptionally high BCs, which create the flattest trajectory and least wind drift possible. The keys to the RDF’s outstanding performance are Nosler’s meticulously optimized compound ogive and long, drag reducing boattail which creates an incredibly sleek form factor. RDF bullets also have the smallest, most consistent meplats of any hollow point match bullet line, so there is no need to point or trim tips.
Features
- Tighter Groups
- Flat Trajectory
- Wind Drift Resistant Design
CAD $53.00 -
Barnes VOR-TX Ammunition 7mm-08 Remington 120 Grain TTSX Polymer Tipped Spitzer Boat Tail Lead-Free Box of 20
Barnes bullets have historically had the reputation of offering quick, clean and humane kills. Now they are taking their highly regarded bullets to the next level loading them in ammunition.
Like its Triple-Shock cousin, the Tipped Triple-Shock bullet delivers the same “three strikes you’re out” rule. Once as it strikes game, two as the bullet begins to open and a third impact when the cavity fully expands to deliver extra shock with maximum transferred energy. The added polymer tip creates a faster expansion rate as well as better long range ballistics. Ideal for deer-sized game.
VOR-TX ammunition is manufactured to precise tolerances to ensure excellent accuracy and consistent velocities. This ammunition is new production, non-corrosive, in boxer-primed, reloadable brass cases.
CAD $53.00 -
Browning BXC Controlled Expansion Ammunition 300 Winchester Short Magnum (WSM) 185 Grain Terminal Tip Box of 20
Features
- Brass tip allows for deep penetration through tough hide and bone
- Combining heavier weights with a boat-tail design increases downrange velocity, accuracy and energy
- Overall bullet design achieves deep and consistent penetration on large animals
- Bonding aids in weight retention, penetration and overall bullet integrity
A global leader in offering quality and innovative firearms, Browning now introduces a new, full-line of superior performance ammunition for hunting, personal defense and target shooting. Browning and Winchester developed this full line of ammunition products under the Browning brand. The Browning Ammunition portfolio includes popular ammunition offerings in rifle, shotgun, handgun and rimfire, featuring advanced technologies for hunters and shooters.
The BXC Controlled Expansion Terminal Tip is designed specifically for use on Big Game like elk, moose, mule deer and bear. The Terminal Tip and bonded bullet design allows for deep penetration through thick, tough hide and bone. The brass tip, heavy bullet weight and boat-tail are integral components to delivering precision accuracy, maximum downrange velocity and long-range, on-target performance. This ammunition is new production, non-corrosive, in boxer-primed, reloadable brass cases.
CAD $53.00 -
Federal Fusion Ammunition 300 Winchester Short Magnum (WSM) 165 Grain Bonded Spitzer Boat Tail Box of 20
Federal Fusion Ammunition is loaded with a specialized bullet, perfect for deer sized game, that features an electrochemically bonded lead core to copper jacket, eliminating the possibility of a core/jacket separation. The boat tail rifle bullets feature a slight dimple in the nose that delivers exceptional accuracy and devastating terminal performance which delivers an impact that radiates lethal shock throughout the target. This energy is optimized through mass weight retention, a top-secret tip-skiving process and superior bullet integrity. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
CAD $53.00 -
Quality Cartridge Brass 375 Remington Ultra Magnum Box of 20
Quality Cartridge started in 1990 manufacturing custom, obsolete and wildcat cartridge cases. Quality Cartridge uses the highest quality materials and equipment to produce the best brass available. Along with the high quality of their products Quality Cartridge also properly head stamps over 450 different calibers from popular wildcats to obsolete cartridges. It is easy to see why Quality Cartridge has become the go-to source for obscure cartridge needs.
Because of variations in case size for some specialty cartridges, it is best to check the brass against a fired case from a particular firearm to ensure suitability. Whenever possible, brass has been formed to published standards for the cartridge. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $53.00 -
Once Fired Brass 9mm Luger Grade 2 Box of 500 (Bulk Packaged)
This brass comes from indoor ranges and may have minor dings, dents or slight imperfections. Most flaws can be easily removed upon resizing or will be shot out upon the first firing. This brass has not been re-sized and must be full-length sized and trimmed before loading the first time. Grade 2 Brass has been tumbled but not yet deprimed. Brass is sold as-is.
CAD $52.65 -
Federal Premium Gold Medal Brass 223 Remington Bag of 100
Federal is known for loading some of the best factory ammunition available and this brass is no different. This brass is manufactured to the same high standards and consistency that have made Federal Premium Ammunition one of the favorites of shooters everywhere. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $52.65 -
Federal Premium Gold Medal Brass 224 Valkyrie Bag of 100
Federal is known for loading some of the best factory ammunition available and this brass is no different. This brass is manufactured to the same high standards and consistency that have made Federal Premium Ammunition one of the favorites of shooters everywhere. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $52.65 -
Remington Brass 6.8mm Remington SPC Bag of 50
Remington cartridge cases are carefully drawn from specially-alloyed brass to provide consistently exact internal volume and resistance to case stretching and brittleness. Primer pocket tolerances are held to .001″, and closely monitored case neck annealing ensures easier re-sizing and longer reloading life. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
CAD $52.65 -
Lee Auto-Drum Powder Measure with Bottle Adapter
Product Overview
The Lee Auto-Drum Powder Measure is an automatic case actuated drum powder measure. Accurately and automatically dispense powder in your favorite cartridge. Two infinitely adjustable drums included. These Quick Change drums will accurately and reliably drop charges from 1 to 80 grains of powder. Case actuated so you never spill a charge. Exclusive elastomer wiper prevents powder shearing, works great with difficult metering extruded powders. Machined body with labyrinth groove mates to the precision molded nylon drums providing a leak free fit with the finest powders. Drum is actuated by a steel sector and pinion gear train. Quick-change hopper has on/off valve to quickly change powders. Sleek modern design, all gears springs and levers inside the die cast housing. Features swivel adapter, makes moving measure fast and convenient.
The included Bottle Adapter allows dispensing powder directly from the shipping container of most popular powder manufactures. Includes a crystal clear bottle that holds over a half a pound of ball powder. Works on all powder bottles with 53mm or 43mm thread. Dispensing powder directly from the bottle assures positive identification of the powder type. Adapter is manufactured from Polypropylene, resistant to attack from all types of powder. Now you can turn off the powder flow and store your powder in its original container with no fear of misidentifying or damage to your hopper from chemical attack.
CAD $52.23 -
Barnes VOR-TX Ammunition 25-06 Remington 100 Grain TTSX Polymer Tipped Spitzer Boat Tail Lead-Free Box of 20
Barnes bullets have historically had the reputation of offering quick, clean and humane kills. Now they are taking their highly regarded bullets to the next level loading them in ammunition.
Loaded with the Barnes Triple-Shock X (TSX) Bullet, this round offers devastating results on varmints. The Barnes TSX bullet is made of 100% copper and contains no lead. When the bullet expands, four razor-sharp cutting petals are created, allowing the bullet to penetrate farther through tough bone and tissue. These bullets usually retain 100% of their original weight.
VOR-TX ammunition is manufactured to precise tolerances to ensure excellent accuracy and consistent velocities. This ammunition is new production, non-corrosive, in boxer-primed, reloadable brass cases.
CAD $52.00 -
Federal Premium Ammunition 300 Winchester Short Magnum (WSM) 150 Grain Nosler Ballistic Tip Box of 20
Quality hunting ammunition designed for maximum performance and reliability. Premium hunting bullets are matched with select powders, primers and brass to create a reliable, hard-hitting hunting cartridge. Vital-Shok loads are great for medium, light-skinned game such as deer. This ammunition is new production, non-corrosive, in boxer primed, reloadable cases.
CAD $52.00 -
Hornady Brass 30-40 Krag Box of 50
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
CAD $52.00 -
Kent Bismuth High Performance Non-Toxic Upland Ammunition 28 Gauge 2-3/4″ 7/8 oz #6 Bismuth Non-Toxic Shot Box of 25
Beginning in 1996 as a small group of sportsmen discussing the future of shotgunning, Kent Cartridge is now an international cartridge company. In 1997, Kent purchased the Activ Cartridge factory in Kearneysville, West Virginia. This gave Kent a home base in the heart of wild and wonderful West Virginia. In 1998 Kent expanded to Europe with the acquisition of the Gamebore Cartridge Company in Hull, England. The Kent-Gamebore Corporation was then formed and now carries on business throughout North America and around the world. The goal was simple, develop a non-toxic shotshell that would equal, and possibly exceed, the performance of high quality lead waterfowl loads. Constantly evolving and leading with proven performance and innovation, Kent products continue to set the benchmark.
Whether you hunt the open plains of the United States, in Europe or Britain, whether the birds are pheasant, chukkar, bobwhites, grouse or woodcock… Kent’s Upland range of products outperforms. With “drop dead” performance and consistency a day in the field means a bird in the hand.
Features
- High Density 9.6g/cc non-toxic shot, has 24% greater density than steel
- Each configuration is loaded to optimal velocities, maximizing ballistic performance
- Softer than steel and higher performance, won’t harm barrels and safe in any choke
CAD $51.68 -
Sellier & Bellot Self Defense Ammunition 410 Bore BB and 000 Buckshot
Sellier and Bellot has been producing cartridge ammunition since 1825. The year 2009 saw one of the milestones in the history of the company, the Brazilian company Companhia Brasileira de Cartuchos S.A. (CBC), also known under the name of Magtech, became the owner of Sellier & Bellot. Another group member is the German company MEN, a globally renowned producer of small-arms ammunition for the military, police, and commercial markets. Due to the merger into one group, the mentioned companies have become more competitive and rank among the largest producers in the world.
Today Sellier and Bellot produce ammunition using high quality components which is the choice of hunters, competitive shooters, law enforcement agencies and militaries around the world. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
CAD $51.68
- Home
- Handgun Ammunition
- 10mm Auto
- 25 ACP
- 30 Super Carry
- 32 ACP
- 32 H&R Magnum
- 32 S&W
- 32 S&W Long
- 327 Federal Magnum
- 357 Magnum
- 357 Sig
- 38 S&W
- 38 Special
- 38 Super
- 380 ACP
- 40 S&W
- 40 Super
- 400 Cor-Bon
- 41 Remington Magnum
- 44 Remington Magnum
- 44 Special
- 45 ACP
- 45 Auto Rim
- 45 Colt (Long Colt)
- 45 GAP
- 45 Super
- 45 Winchester Magnum
- 454 Casull
- 460 Rowland
- 460 S&W Magnum
- 5.7x28mm FN
- 50 Action Express
- 500 JRH
- 500 S&W Magnum
- 7.62x25mm Tokarev
- 9mm Luger
- 9mm Makarov
- 9x25mm Dillon
- Primers
- Reloading Brass
- Smokeless Powder
- Rifle Ammunition
- 17 Remington
- 204 Ruger
- 22 Hornet
- 22 Nosler
- 22-250 Remington
- 220 Swift
- 221 Fireball
- 222 Remington
- 223 Remington
- 223 Winchester Super Short Magnum
- 224 Valkyrie
- 243 Winchester
- 25-06 Remington
- 257 Roberts
- 257 Weatherby Magnum
- 260 Remington
- 264 Winchester Magnum
- 270 Weatherby Magnum
- 270 Winchester
- 270 Winchester Short Magnum
- 28 Nosler
- 280 Remington
- 280 Remington Ackley Improved 40-Degree Shoulder
- 30 Carbine
- 30 Nosler
- 30-06 Springfield
- 30-30 Winchester
- 30-378 Weatherby Magnum
- 30-40 Krag
- 300 AAC Blackout (7.62x35mm)
- 300 H&H Magnum
- 300 PRC
- 300 Remington Short Action Ultra Magnum
- 300 Remington Ultra Magnum
- 300 Savage
- 300 Weatherby Magnum
- 300 Winchester Magnum
- 300 Winchester Short Magnum
- 303 British
- 308 Winchester
- 32 Winchester Special
- 32-20 WCF
- 325 Winchester Short Magnum (WSM)
- 33 Nosler
- 338 Federal
- 338 Lapua Magnum
- 338 Remington Ultra Magnum
- 338 Winchester Magnum
- 338-06 A-Square
- 340 Weatherby Magnum
- 35 Remington
- 35 Whelen
- 350 Legend
- 358 Winchester
- 375 H&H Magnum
- 375 Ruger
- 375 SOCOM
- 38-55 WCF
- 4.6x30mm HK
- 404 Jeffery
- 416 Remington Magnum
- 416 Rigby
- 44-40 WCF
- 444 Marlin
- 45 Raptor
- 45-70 Government
- 450 Bushmaster
- 458 HAMR
- 458 Lott
- 458 SOCOM
- 458 Winchester Magnum
- 460 Weatherby Magnum
- 470 Nitro Express
- 5.56x45mm NATO
- 50 Beowulf
- 500 Auto Max
- 500 Nitro Express 3″
- 6.5 Creedmoor
- 6.5 Grendel
- 6.5 PRC
- 6.5-300 Weatherby Magnum
- 6.5mm-284 Norma
- 6.5x47mm Lapua
- 6.5x55mm Swedish Mauser
- 6.8 Western
- 6.8mm Remington SPC
- 6mm Advanced Rifle Cartridge (6mm ARC)
- 6mm Creedmoor
- 6mm Remington
- 7.62x39mm
- 7.62x51mm NATO
- 7.62x54mm Rimmed Russian
- 7mm Remington Magnum
- 7mm Remington Short Action Ultra Magnum
- 7mm Remington Ultra Magnum
- 7mm STW
- 7mm Weatherby Magnum
- 7mm-08 Remington
- 7x57mm Mauser (7mm Mauser)
- 7x64mm Brenneke
- 8mm Remington Magnum
- 8x57mm JS Mauser (8mm Mauser) (323 Dia)
- 9.3x62mm Mauser
- 9.3x74mm Rimmed
- Rimfire Ammunition
- Shotgun Ammunition